48716
21
Zoom out
Zoom in
Previous page
1/156
Next page
01X Owner’s Manual
Controls and Connectors
21
Before UsingBasics SectionAppendix Getting StartedReference
q MIC/LINE INPUT
•MIC/LINE INPUT (XLR) jacks 1/2
These are XLR-3-31 type balanced input jacks. The
nominal input level is -46 to +4 dB. Mics, direct
boxes, or line level devices with balanced output
jacks can be connected here. Each jack corresponds
to AD1and AD2 of the Input Patch settings (pages 27,
61, 88). The pin configuration is shown below.
•MIC/LINE INPUT (TRS phone) jacks 3
through 8 (BAL)
These are TRS phone type 1/4" input jacks (bal-
anced). The nominal input level is -46 to +4 dB.
Devices such as synthesizers or rhythm machines
with unbalanced outputs can also be connected here.
Each jack corresponds to AD3 through AD8 of the
Input Patch settings (pages 27, 61, 88). The pin con-
figuration is shown below.
•MIC/LINE INPUT jack 8 (HI-Z)
This is a high impedance 1/4" phone input jack
(unbalanced). The nominal input level is -46 to
+4dB. An instrument with high output impedance
such as an electric guitar or bass with passive-type
pickups can be connected here. This jack corre-
sponds to AD8 of the Input Patch settings (pages 27,
61, 88).
w STEREO/AUX OUT jacks
These are 1/4" phone output jacks (unbalanced) that output
the signals of the stereo bus, rec bus or AUX bus 1/2.
e MONITOR OUT jacks
These are 1/4" phone output jacks (unbalanced) for con-
nection to your monitor setup, such as a stereo system or
powered speakers.
r PHONES jack
This is a 1/4" TRS phone output jack for connecting a set
of stereo headphones for monitoring.
Rear Panel
qw
i
u tyo!0!2 !1
er
Male XLR connector
1 (ground)
3 (cold)
2 (hot)
1/4" TRS phone plug
Ring (cold)
Sleeve (ground)
Tip (hot)
Using Phase Reverse
On some audio devices, the hot and cold pin placement
of the connector may be reversed (compared to the
conventional configuration). In this condition, the audio
may sound “squashed” or unnatural (out of phase)
when heard in stereo. When using such devices, set
the Phase parameter (page 99) to Reverse.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 01X at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 01X in the language / languages: English as an attachment in your email.

The manual is 3,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info