517047
49
Zoom out
Zoom in
Previous page
1/71
Next page
Troubleshooting 49
01V96i—Owner’s Manual
Troubleshooting
Troubleshooting
Power won’t turn on, panel LEDs or
LCD won’t light
Are the LCD contrast and panel brightness set appropriately?
Is the POWER switch turned on?
If the power still does not turn on, contact a Yamaha service center listed at the
end of the manual.
Sound is not input
Is the optional I/O card inserted correctly? (see page 18)
Is the signal from the external device being input?
Is the input port patched to an input channel? (see page 29)
Is the GAIN set to an appropriate level? (see page 32)
Is the EQ attenuator raised? (see page 35)
Is an insert turned on even though it is not assigned correctly?
Is the input channel’s [ON] key indicator lit?
Is the input channel’s fader raised?
Sound is not output
Is the optional I/O card inserted correctly? (see page 18)
Is the STEREO channel’s [ON] key indicator lit?
Is the output channel patched to an output port? (see page 31)
Sound is not output from
headphones or MONITOR OUT jacks
Is the [PHONES] knob or [LEVEL] knob set to an appropriate volume?
Insufficient volume
Is the GAIN set to an appropriate level? (see page 32)
Is the input channel’s fader raised?
Could the EQ gain be lowered excessively? (see page 35)
Could the GATE/COMP threshold or ratio be set to an excessive value? (see
page 37)
Is the EQ attenuator raised? (see page 35)
Is the output channel’s fader raised?
Check the levels in each screen of the METER function. (see page 23)
Sound is distorted
Is the wordclock set correctly? (see page 27)
Is the GAIN set to an appropriate level? (see page 32)
Could the input channel’s fader be raised excessively?
Could the STEREO channel’s fader be raised excessively?
Could the EQ or COMP gain be raised excessively?
(see pages 35–37)
Sound is output even though not
patched to an output channel
Could the input channel be set to direct out? (see page 33)
Could insert out be assigned to the output channel?
Operating a fader does not change
the level as expected
Are the correct channels selected in the LAYER section?
Only a specific channel is heard from
the MONITOR OUT or PHONES jack
Could the [CUE] key be on?
Noise is present in an externally
connected recorder or device
Is the wordclock set correctly? (see page 27)
Could an unsynchronized signal be input?
Is the oscillator turned on? (see page 45)
High-frequency range is lacking
Could emphasis be applied? This will occur if the state of the input signal does
not match the emphasis data.
Could EQ be applied? (see page 35)
An input signal is being input, but
there’s no monitor output
Could DIMMER be applied?
Is the routing appropriate for the signal you want to monitor?
Headroom is restricted, particularly
when EQ boost is applied
Use the EQ’s attenuator to reduce the level. (see page 35)
Signal is delayed Check whether the delay of each channel is set correctly.
Can’t save scene memories or library
data
Could you be attempting to save a read-only scene/library memory, or a pro-
tected scene? (see page 42)
Can’t transmit/receive MIDI data
Is the MIDI PORT selected correctly?
Are the MODE and channel selected correctly on the transmitting and receiving
devices?
Have you assigned an event to the program change?
When a scene is recalled, some
channels/parameters do not update
Could recall safe be specified for those channels/parameters?
When a scene is recalled, it takes time
for the faders to stop
Could a fade time have been specified?
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 01V96i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 01V96i in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha 01V96i

Yamaha 01V96i Quick start guide - English - 32 pages

Yamaha 01V96i User Manual - German - 71 pages

Yamaha 01V96i User Manual - French - 71 pages

Yamaha 01V96i User Manual - French - 34 pages

Yamaha 01V96i User Manual - Portuguese - 71 pages

Yamaha 01V96i User Manual - Spanish - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info