517047
35
Zoom out
Zoom in
Previous page
1/71
Next page
EQ’ing the Input Signals 35
01V96i—Owner’s Manual
Tutorial
7. Move the cursor to the parameter box for
the Input Channels you want to route to
Direct Outs, then specify the output con-
nectors or channels.
In this example, Input Channel 9–12 signals are
routed to ADAT OUT channels 5–8.
8. Press the DISPLAY ACCESS [PAN/ROUT-
ING] button repeatedly until the
Pan/Route | Rout1-16 page appears.
9. Move the cursor to the D button for the
Input Channels you want to route to
Direct Outs, then press [ENTER].
The Input Channels for which the D
buttons are turned on are directly
patched to the output connectors or
channels specified in Step 7.
EQ’ing the Input Signals
The 01V96i’s Input Channels feature 4-band full para-
metric EQ. This section describes how to use the EQ of
an Input Channel to adjust the tonal character.
1. Press the LAYER [1–16] button.
Input Channel Layer 1–16 is now available for con-
trol from the channel strip section.
2. Press the [SEL] button for the Input
Channel to which you want to apply EQ.
3. Press the [EQ] button, then the [F1] but-
ton to display the EQ | EQ Edit page.
The EQ Edit page enables you to adjust the EQ
parameters for the currently-selected channel.
4. Make sure that the EQ ON button (in the
upper-left corner) is turned ON.
The EQ ON/OFF button turns the cur-
rently-selected Input Channels EQ on or off. If the
button is off, press the [ENTER] button to turn it
on.
5. While sound is being produced on the
instrument or other device, adjust the EQ
parameters.
To do so, move the cursor to the parameters in the
lower half of the page, then rotate the Parameter
wheel to change the values. You can adjust the fol-
lowing parameters for the LOW, L-MID, H-MID,
and HIGH bands individually.
•Q
This parameter control specifies the Q (slope) for
cut/boost of the center frequency set via the F
parameter control. The setting range is between 10
and 0.10. The higher the value, the steeper the slope
becomes. This parameter control also selects the
type of EQ for the LOW and HIGH band.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 01V96i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 01V96i in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha 01V96i

Yamaha 01V96i Quick start guide - English - 32 pages

Yamaha 01V96i User Manual - German - 71 pages

Yamaha 01V96i User Manual - French - 71 pages

Yamaha 01V96i User Manual - French - 34 pages

Yamaha 01V96i User Manual - Portuguese - 71 pages

Yamaha 01V96i User Manual - Spanish - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info