517047
32
Zoom out
Zoom in
Previous page
1/71
Next page
32 Tutorial
01V96i—Owner’s Manual
Setting the Input Levels
The explanation here provides an example of adjusting
the input level of the signals from instruments or mics
connected to INPUT connectors, with the input patch-
ing in the default state.
1. While the musicians play the instruments
or devices connected to the INPUT con-
nector, adjust each [PAD] and [GAIN] so
that [PEAK] flickers briefly when the max-
imum volume occurs..
2. Press the LAYER [1–16] button.
Input Channel Layer 1–16 is now available for con-
trol from the channel strip section.
3. Press the FADER MODE [HOME] button,
then press the [F1] button to display the
Meter | CH1-32 page.
Meter pages are the start point for mixing and
recording. They display channel input and output
levels, and compressor and gate gain reduction
amounts. The CH1-32 page enables you to view
Input Channel 1–32 levels and compressor and gate
gain reduction amounts.
4. Make sure that the LEVEL button (1) is
turned on in the METER MODE section.
The METER MODE section enables you to select
the type of signals displayed on the meters. If any
button other than the LEVEL button is turned on,
move the cursor to the LEVEL button, then press
[ENTER].
5. Move the cursor to the POSITION param-
eter box (
2) to the right of the LEVEL
button, rotate the Parameter wheel or
press the [INC]/[DEC] buttons to select
“POST FADER,” then press [ENTER].
The POSITION parameter indicates the metering
position. When “POST FADER” is selected, the
meters indicate the post-fader signal levels.
6. Make sure that the [ON] button of the
corresponding channel is on (lit), and
raise the fader to the 0 dB position.
7. While the musicians play the musical
instruments, check the input channel lev-
els using the level meters on the display.
Note: The [GAIN] controls adjust the analog input
sensitivity. To make a high-quality recording with a
wide dynamic range and little noise, set the [GAIN]
controls as high as possible while avoiding clipping.
Note: Since the fader and [ON] button positions of
each layer are memorized, those positions for the cor-
responding layer are restored when you switch to that
layer.
21
Note: If you set the POSITION parameter to “PRE
EQ, the pre-EQ input levels are metered. If you set the
parameter to “PRE FADER,” the post-EQ and
pre-fader input levels are metered.
Note: If the meters reach the “OVER” level, make sure
that the faders are set to 0dB, then lower the corre-
sponding [GAIN] controls.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 01V96i at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 01V96i in the language / languages: English as an attachment in your email.

The manual is 5,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha 01V96i

Yamaha 01V96i Quick start guide - English - 32 pages

Yamaha 01V96i User Manual - German - 71 pages

Yamaha 01V96i User Manual - French - 71 pages

Yamaha 01V96i User Manual - French - 34 pages

Yamaha 01V96i User Manual - Portuguese - 71 pages

Yamaha 01V96i User Manual - Spanish - 71 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info