517044

Yamaha 01V Manual

289
Zoom out
Zoom in
Previous page
1/308
Next page
288 MIDI-Datenformat
01V—Bedienungsanleitung
PARAMETER CHANGE (7bit operation for type
0x10:edit buffer)
Reception
This message is received if [Parameter Change RX] is ON and the [Rx
CH] matches the Device Channel included in the SUB STATUS.
This is echoed if [Parameter Change ECHO] is ON.
When this is received, the specified parameter will be controlled.
Transmission
If [Parameter Change TX] is ON, this message is transmitted on the
[Tx CH] Device Channel when a parameter not specified in the
[Control Assign Table] is modified.
The valid range of addresses is 0x0000 - 0x03FF
PARAMETER CHANGE (bit operation for type
0x40:edit buffer)
Reception
When [Parameter Change RX] is ON, this message is received if the
[Rx CH] matches the Device Channel included in the SUB STATUS.
If [Parameter Change ECHO] is ON, this message will be echoed.
When this message is received, the specified parameter will be con-
trolled.
Transmission
If [Parameter Change TX] is ON, this message is transmitted on the
[Tx CH] Device Channel when a parameter not specified in the
[Control Assign Table] is modified.
The valid range of addresses is 0x0000 - 0x03FF
PARAMETER CHANGE (byte operation for type
0x01:system memory)
Reception
When [Parameter Change RX] is ON, this message is received if the
[Rx CH] matches the Device Channel included in the SUB STATUS.
When [Parameter Change ECHO] is ON, this is echoed.
When this is received, the specified parameter will be controlled.
The system memory will depend on the address, as follows.
PARAMETER CHANGE (bit operation for type
0x41:system memory)
Reception
When [Parameter Change RX] is ON, this message is received if the
[Rx CH] matches the Device Channel included in the SUB STATUS.
When [Parameter Change ECHO] is ON, this is echoed.
When this is received, the specified parameter will be controlled.
The system memory will depend on the address, as follows.
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0001nnnn 1n parameter change n=0-15(Device Chan-
nel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00010000 10 7bit operation for edit buffer (type)
DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address
0aaaaaaa dd1 address( L) low 7 bits of 14 bits address
0ddddddd dd2 data 7bit
: :
EOX 11110111 F7 End Of Exclusive
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0001nnnn 1n parameter change n=0-15(Device Chan-
nel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 01000000 40 bit operation for edit buffer (type)
DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address
0aaaaaaa dd1 address( L) low 7 bits of 14 bits address
0ddddddd dd2 data(bit0-2:change bit no.0-7, bit3:0=reset
1=set)
: :
EOX 11110111 F7 End Of Exclusive
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0001nnnn 1n parameter change or response
n=0-15(Device Channel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 00000001 01 byte operation for system memory (type)
DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address
0aaaaaaa dd1 address( L) low 7 bits of 14 bits address
0000dddd dd2 data( H) high 4 bits of 8 bits data
0000dddd dd3 data( L) low 4 bits of 8 bits data
: : continuous address datas
EOX 11110111 F7 End Of Exclusive
0x0000 - 0x007F : setup memory(128byte)
0x0080 - 0x0147 : backup memory(200byte)
0x0200 : card type(1byte)
STATUS 11110000 F0 System Exclusive Message
ID No. 01000011 43 Manufacturer's ID No.(YAMAHA)
SUB STATUS 0001nnnn 1n parameter change or response
n=0-15(Device Channel No.1-16)
GROUOP ID 00111110 3e MODEL ID
MODEL ID 00000100 04 Device code (01V)
PARAM TYPE 01000001 41 bit operation for system memory (type)
DATA 0aaaaaaa dd0 address( H) high 7 bits of 14 bits address
0aaaaaaa dd1 address( L) low 7 bits of 14 bits address
0ddddddd dd2 data(bit0-2:change bit no.0-7, bit3:0=reset
1=set)
: :
EOX 11110111 F7 End Of Exclusive
0x0000 - 0x007F : setup memory(128byte)
0x0080 - 0x0147 : backup memory(200byte)
… 289 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yamaha 01V at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yamaha 01V in the language / languages: German as an attachment in your email.

The manual is 5,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yamaha 01V

Yamaha 01V User Manual - English - 303 pages

Yamaha 01V User Manual - Dutch - 314 pages

Yamaha 01V User Manual - French - 299 pages

Yamaha 01V User Manual - Italian - 313 pages

Yamaha 01V User Manual - Portuguese - 94 pages

Yamaha 01V User Manual - Spanish - 314 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info