Manual Yale SR Series - Smarthome Alarm (page 10 of 20) (English)

655216

Zoom out

Zoom in

1/20

Using the System

Changing your Key Pad PIN

The default Key Pad PIN is 1234. You can set up to 6 sets

of 4 digit PIN numbers by:

Arming and Disarming your Alarm

Using the Yale Home System App

Setting up Home Arm Mode

The Home Arm Mode allows the home to be partially

armed so that no one can get inside without rst disarming

the system. However, the person inside the house can

move freely around without triggering the alarm. Home

mode is usually used to protect the ground oor when you

are upstairs in bed.

To enable Home Arm, you need to choose the sensors

to be ignored whilst in this mode. It would typically be the

bedroom PIR etc if you want to arm your system during

the night. These sensors should be set to Home Omit in

order to be ignored during Home Arm Mode. If you wish

to trigger an alarm count down with a sensor during Home

Arm Mode, allowing you time to disarm the alarm when

coming home, please select the mode: Home Access.

Note! The PIR Motion Detector and PIR

Image Camera have a built in battery save

mode. After detecting motion, they will wait

for one minute without motion before sending

any signals to the Smart Hub. This saves

battery power.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Yale SR Series - Smarthome Alarm in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Yale SR Series - Smarthome Alarm Manual

Product: