655216

Yale SR Series - Smarthome Alarm Manual

4
Zoom out
Zoom in
Previous page
1/20
Next page
4
Unpack all the parts
2
Smart Hub 2.0
1. Unpack the kit content on a table. Remove the mounting
plate (if tted) from the Smart Hub by sliding plate
downwards. A power adaptor is supplied that plugs into
the main wall socket and Smart Hub. Plug in the power
adaptor and connect the Smart Hub to your internet
router using the cable provided.
2. In addition to the adapter, there is a rechargeable battery
inside the Smart Hub that serves as a backup in case
of a power failure. A fully charged battery can provide
backup standby power for a period of approximately 5
hours. It takes approximately 72 hours to fully charge the
battery. The battery must always be turned on.
3. Remove the rubber battery switch cover and locate
the battery switch. Switch ON the internal battery and
replace the rubber cover.
Smart Hub LED’s
Top LED Green = Linked to the
Server/Internet
Top LED not lit = No link to the
Server/Internet
Middle LED Yellow = System Fault
Further details can be found in the App
Middle LED not lit = System OK
Bottom LED solid red = System Armed
Bottom LED ashing red = System part Armed
Bottom LED not lit up = System Disarmed
Key Pad EF-KP
1. Pull out the plastic battery saver tab at the back of the
Key Pad. This will activate the batteries.
2. All accessories in the kit box are already pre-learned to
the system.
PIR Motion Detector EF-PIR
1. Pull out the plastic pull tab on the back of the PIR. This
will activate the batteries.
2. All accessories in the kit box are already pre-learned to
the system.
Not Included in the Starter Kit
Door/Window Contact EF-DC
(SR-320, 330 & 340 Kits)
1. Pull out the battery saver tab on the side to activate
the battery.
2. All accessories in the kit box are already pre-learned to
the system.
ale
Y
1
2
3
6
5
4
7
8
9
0
Panic button A
Panic button B
Disarm
Home
Arm
LED
Learn button=
Press 8 and 9 together
/
Away
ale
Y
Status
LED
Learn/Test button Cover
screw
ale
Y
Learn/Test
button
LED
Gap no more
than 10mm
Magnet
Sensor
Battery Switch
Cover
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yale SR Series - Smarthome Alarm at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yale SR Series - Smarthome Alarm in the language / languages: English as an attachment in your email.

The manual is 2,98 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info