478493
128
Zoom out
Zoom in
Previous page
1/168
Next page
VX-8GR/GE OPERATING MANUAL126
1: ANTENNA ATT
2: APO
3: ARTS BEEP
4: ARTS INTERVAL
5: BANK LINK
6: BANK NAME
7: BCLO
8: BEEP EDGE
9: BEEP LEVEL
10: BEEP MELODY
11: BEEP SELECT
12: BELL RINGER
13: BELL SELECT
14: BUSY LED
15: CLOCK SHIFT
16: CW ID
17: CW LEARNING
18: CW PITCH
19: CW TRAINING
20: DC VOLTAGE
21: DCS CODE
22: DCS INVERSION
23: DTMF DELAY
24: DTMF MANUAL/AUTO
25: DTMF SELECT
26: DTMF SPEED
27: EAI
28: EAI TIME
29: EMERGENCY SELECT
30: EXTENDED MENU
31: FW KEY HOLD TIME
32: HALF DEVIATION
33: HOME VFO
34: HOME/REVERSE
35: INT MANUAL/AUTO
36: INTERNET
37: INTERNET CODE
38: INTERNET KEY
39: INTERNET MODE
40: INTERNET SELECT
41: LAMP
42: LANGUAGE
43: LCD CONTRAST
44: LCD DIMMER
45: LED LIGHT
46: LOCK
47: MEMORY FAST STEP
48: MEMORY NAME
49: MEMORY PROTECT
SET MODE
Enables/Disables the receiver Front-end Attenuator.
Setting of the Automatic Power-Off time.
Select the Beep option during ARTS
TM
operation.
Select the Polling Interval during ARTS
TM
operation.
Enables/Disables the Memory Bank Link Scan.
Stores Alpha-Numeric “Tag” for the Memory Bank.
Enables/disables the Busy Channel Lock-Out feature.
Enables/disables the Band-edge beeper while selecting the frequency by the DIAL knob.
Adjust the Beep volume level.
Create the Beep Melody for Bell ringer function.
Enables/Disables the keypad beeper.
Selects the number of Bell ringer repetitions.
Enables/Disables the Bell ringer function and its sound selection.
Enables/Disables the BUSY LED while the squelch is open.
Shifting of CPU clock frequency.
Program and activate the CW Identifier (used during ARTS
TM
operation).
Enables/Disables the CW Learning feature.
Select the CW tone pitch for the CW Learning, CW Training, and CW Identifier functions.
Enables/Disables the CW Training feature.
Indicates the DC Supply Voltage.
Setting of the DCS code.
Enables/Disables the “Inverted” DCS tone.
Selects the DTMF Autodialer Delay Time.
Enables/Disables the DTMF Autodial feature.
Programming of the DTMF Autodialer.
Selects the DTMF Autodialer Sending Speed.
Enables/Disables the Emergency Automatic ID (EAI) feature.
Sets the transmitting time of the Emergency Automatic ID (EAI) feature.
Select the alarms utilized when the Emergency function is engaged.
Enables/Disables the extended Set Mode Menu.
Set the time duration that a secondary function is active when the
[
F/W
]
key is pressed and
held to enable the secondary functions.
Reducing the Deviation level by 50 %.
Enables/Disables the function of the VFO DIAL knob, while in the Home Channel mode.
Selects the primary function of the
[
H/M
]
key (press the
[
H/M
]
key).
Enables/Disables the DTMF Autodialer feature while operating using the Internet Connec-
tion feature (WIRES
TM
).
Enables/Disables the Internet Connection feature (WIRES
TM
).
Selects the Access Number (DTMF digit) for the SRG operation of the Internet Connection
feature (WIRES
TM
).
Selects the primary function of the
[
INTERNET
]
key.
Selects the operating mode of the Internet Connection feature (WIRES
TM
).
Programming of the Access Number (DTMF code) for the FRG station of the WIRES
TM
(or
non WIRES
TM
Internet Link System) access.
Selects the LCD/Keypad Lamp mode.
Selects the language for the Set Mode selections.
Setting of the Display contrast level.
Setting of the Display brightness level.
Illuminates the white LED light continuously (useful as emergency flashlight at night).
Selects the Control Locking lockout combination.
Selects the channel step for the fast channel selection mode while in the Memory Recall
mode.
Stores “Alpha-Numeric” tags for the Memory channels.
Enables/Disables the Memory Write Protector.
SET MODE ITEM FUNCTION
ON / OFF
0.5hour - 12.0hour / OFF
IN RANGE / ALWAYS / OFF
15sec / 25sec
--
--
ON / OFF
ON / OFF
LEVEL 1 ~ LEVEL 9
(
LEVEL 5
)
--
KEY & SCAN / KEY / OFF
1Time - 20Times / CONTINUOUS
OFF / BELL /
USER BP1 / USER BP2 / USER BP3
ON / OFF
ON / OFF
--
--
400 - 1000 Hz
(
50 Hz/step
)
(
700 Hz
)
--
--
104 standard DCS codes
(
DCS 023
)
RX-NORMAL, TX-NORMAL /
RX-INVERT, TX-NORMAL /
RX-BOTH, TX-NORMAL /
RX-NORMAL, TX-INVERT /
RX-INVERT, TX-INVERT /
RX-BOTH, TX-INVERT
50ms / 250ms / 450ms / 750ms / 1000ms
MANUAL / AUTO
--
50ms / 100ms
ON / OFF
INT 1min ~ INT 9min / INT10min / INT15min /
INT20min / INT30min / INT40min / INT50min
(
INT 5min
)
BEEP / STROBE / BEEP&STROBE /
BEAM / BEEP&BEAM / CW / BEEP&CW /
CW-ID TX
ON / OFF
FW0.3sec / FW0.5sec / FW0.7sec /
FW1.0sec / FW1.5sec
ON / OFF
DISABLE / ENABLE
HOME / REV
MANUAL / AUTO
ON / OFF
DTMF 0 ~ DTMF 1, DTMF A ~ DTMF D,
DTMF , DTMF #
(
DTMF 1
)
INTERNET / INTERNET SELECT /
SET MODE
FRG / SRG
--
KEY 2sec - KEY10sec / CONTINUOUS /
OFF
(
KEY 5sec
)
ENGLISH / JAPANESE
LEVEL 1 ~ LEVEL15
(
LEVEL 7
)
LEVEL 1 ~ LEVEL 4
--
KEY / DIAL / KEY&DIAL / PTT / KEY&PTT /
DIAL&PTT / ALL
10CH / 20CH / 50CH / 100CH
--
ON / OFF
AVAILABLE VALUES
(
DEF ALT: BOLD ITALIC
)
128


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-8GR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-8GR in the language / languages: English as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info