478493
68
Zoom out
Zoom in
Previous page
1/168
Next page
VX-8GR/GE OPERATING MANUAL66
The VX-8GR/GE allows the display of your position (Longitude/Latitude) with the built-
in GPS Antenna Unit.
1. Press the m key until the GPS screen appears.
2. Press and hold in the m key for one second to enter the APRS/GPS Set Mode.
3. Rotate the DIAL knob to select Set Mode Item 18: GPS POWER.
4. Press the m key briefly to enable selection of this Set Mode Item.
5. Rotate the DIAL knob to select “GPS ON” (to activate the built-in GPS Antenna
Unit).
6. Press the PTT switch briefly to save the new setting and exit to normal operation.
7. When the transceiver succeeds in receiving a valid GPS
signal, your current position (Longitude/Latitude), current
time (UTC), and altitude will appear on the display. Rotate
the DIAL knob (or press the a/b key) to scroll through
additional lines of station text on the display.
The received satellite number appears at the lower right of
compasses (In the example at the right, it is 4 satellites).
When receiving a signal from more than 3 satellites, the
” icon will appear on the display.
Advice: 1) When the built-in GPS Antenna Unit is first turned on, it may take several
minutes to compute a fix of your position. This is normal, as the built-in GPS unit is
downloading “almanac” information from the GPS satellites.
2) While the VX-8GR/GE searches for a GPS signal, the compass icon does not
appear on the display and the position information (Longitude/Latitude) blinks on the
display.
3) If the VX-8GR/GE does not receive a valid GPS signal after three minutes have
passed, you may be in a poor location for satellite reception, such as inside of a house
or building; try moving to a less obstructed position.
8. If you walk a few meters from your current location, your course direction is dis-
played on the compass of the display and walking speed is displayed in the “SPD
column of the display.
9. Press the M key to toggle the GPS screen between “North
Up” and “Heading Up”. The course direction displays a
black arrow in the “North Up” screen, and displays a white
arrow and small “H” icon in the “Heading Up” screen.
10. To return to normal operation, press the m key several
times until the normal screen appears.
1) When the VX-8GR/GE GPS signal is interrupted;
such as when you enter into a tunnel, the compass icon
disappears from the display but maintains the position
information (Longitude/Latitude) at the point where the GPS sig-
GPS OPERATION
“NORTH UP
“HEADING UP
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-8GR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-8GR in the language / languages: English as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info