478494
136
Zoom out
Zoom in
Previous page
1/168
Next page
VX-8GR/GE OPERATING MANUAL134
SET MODE
SET MODE ITEM 28: EAI TIME
Function: Sets the transmitting time of the Emergency Automatic ID (EAI) feature.
Available Values: INT 1min ~ INT 9min / INT10min / INT15min / INT20min /
INT30min / INT40min / INT50min
Default: INT 5min
SET MODE ITEM 29: EMERGENCY SELECT
Function: Select the alarms utilized when the Emergency function is engaged.
Available Values: BEEP / STROBE / BEEP&STROBE / BEAM / BEEP&BEAM / CW /
BEEP&CW / CW-ID TX
Default: BEEP & STROBE
BEEP: Loud “Alarm” sounds.
STROBE: Flashes the white LED light.
BEEP&STROBE: Loud “Alarm” sounds along with flashing of the white LED light.
BEAM: The white LED light glows continuously.
BEEP&BEAM: Loud “Alarm” sounds and the white LED light glows continuously.
CW: The white LED light flashes according to the programmed Emer-
gency message (Morse Code)
at a rate of five words per minute.
BEEP&CW: Sounds tones via the speaker, and flashes the white LED light, ac-
cording to the programmed Emergency message (Morse Code)
at a
rate of five words per minute.
CW-ID TX: Transmits the programmed Emergency message (Morse Code)
and
flashes the white LED light, according to the programmed Emergency
message (Morse Code)
on the air beginning one minute after activa-
tion of the Emergency function.
: The internationally-recognized Morse Code “S.O.S” message (
) is
programmed at the factory for the Emergency message.
Here’s how to program the Emergency Message:
1. Press the M key to display any previously-stored emergency message.
2. Press and hold the h key for two seconds to clear any previous emergency mes-
sage, if desired.
3. Rotate the DIAL knob, or press one of the keyboard keys, to select the first letter/
number of the message.
Example 1: Rotate the DIAL knob to select any of the 39 available characters.
Example 2: Press the 2 key repeatedly to toggle among the four available charac-
ters associated with that key: A B C 2
4. Press the M key to move to the next character, if needed.
5. Repeat previous steps 3 and 4 to complete the message (up to 16 characters).
SET MODE SELECTION DETAILS
136


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-8GE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-8GE in the language / languages: English as an attachment in your email.

The manual is 4,19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info