478489
85
Zoom out
Zoom in
Previous page
1/104
Next page
VX-7R OPERATING MANUAL 83
SET MODE
Ú1: Depends on the Frequency Band. Ú2: Requires optional SU-1 Ú3: Depends on the Transceiver Version.
Function
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency.
Setting of the DCS code.
Enables/Disables “Inverted” DCS code decoding.
Selects the CTCSS Bell ringer repetitions.
Enables/disables split CTCSS/DCS coding.
Enables/disables the DTMF Autodial feature.
Programming of the DTMF Autodialer.
Selects the Channel Counter Search Width.
Enables/disables the Band-edge beeper while scanning.
Selects the Scan Resume mode.
Enables/disables the Scan lamp while paused.
Selects the Smart Search Sweep mode.
Selects the Spectrum Analyzer Sweep mode.
Enables/disables the audio output of the center frequency
(T) when the Spectrum Analyzer is activated in the
Amateur band.
Selects the display of the sensor units’s information.
Select the Wave Form to be monitored.
Selects the measurement units for the Temperature sensor.
Selects the measurement units for the Barometric
Pressure sensor
Ú2
.
Correcting the Barometric Pressure
Ú2
.
Select the measurement units for the Altimeter
Ú2
.
Correcting the Altimeter
Ú2
.
Setting of the Automatic Power-Off time.
Selects the Receive-mode Battery Saver interval (“sleep”
ratio).
Enables/disables the Transmit Battery Saver.
Setting of the TOT time.
Set the ON Timer time.
Set the OFF Timer time.
Select the Beep option during ARTS operation.
Select the Polling Interval during ARTS operation.
Program and activate the CW Identifier (used during
ARTS operation).
Enables/disables the Busy Channel Lock-Out feature.
Selects the function of the [HM/RV(EMG)] key.
Selects the MONI key (just below the PTT switch)
function.
Exchange the functions between the [MON/F] key and the
MONI keys on the left side of the radio.
Select the alarms utilized when the Emergency function is
engaged.
Reducing the Deviation level by 50%.
Enables/disables VOX operation; sets VOX sensitivity.
Selects the VOX delay (“hang”) time.
Enables/disables the BAND Link feature.
Selects or disables the VFO Band edge for the current
band.
Editing of the User font.
Enables/disables the Icon display.
Editing of the User Icon.
ICON selection.
Shifting of CPU clock frequency.
Sets the Clock time.
Selects the language for the Set (Menu) mode selections.
Enables/disables the Front-end Attenuator
Enables/disables the Microphone Monitor feature.
Enables/disables the Weather Alert Feature
Available Values
(
Default: Bold Italic
)
OFF/TONE/TONE SQL/DCS
50 standard CTCSS tones
(88.5 Hz)
104 standard DCS codes (023)
ENABLE/DISABLE
OFF/1/3/5/8/CONTINUE
OFF/ON
ON/OFF
±5 MHz/±10 MHz/± 50 MHz/
±100 MHz
ON/OFF
3SEC/5SEC/7SEC/10SEC/BUSY/
HOLD
ON/OFF
1/CONTINUOUS
1/CONTINUOUS
ON/OFF
TIME/DC/TEMP/WAVE/BARO
Ú2
/
ALTI
Ú2
/WX
Ú2
/OFF
ALL/
RX SIGNAL
/
TX MODULATION
°C/°F
Ú3
hpa/mbar/mmHg/inch
Ú3
m/ft
Ú3
OFF/30 min/1 hour/3 hours/
5 hours/8 hours
OFF/200mS(1:1)/300mS(1:1.5)/
500mS(1:2.5)/1s(1:5)/2s(1:10)
ON/OFF
OFF/1 min/2.5 min/5 min/10 min
OFF/00:00 ~ 23:59
OFF/00:00 ~ 23:59
IN RANGE/ALWAYS/OFF
15 SEC/25 SEC
ON/OFF
HOME/REV
MONI/T-CAL
Ú3
FUNC/MONI
BEEP+STROBE/BEEP/
STROBE1/STROBE2/STROBE3/
STROBE4/ STROBE5/BEAM
ON/OFF
OFF/HIGH/LOW
0.5S/1S/2S
ON/OFF
ALL/BAND
ON/OFF
ON/OFF
ENGLISH/JAPANESE
ON/OFF
ON/OFF
ON/OFF
Set Mode Item
#1 [SQL TYPE]
#2 [TONE SET]
#3 [DCS SET]
#4 [DCS COMPLEMENT]
#5 [BELL]
#6 [SPLIT TONE]
#7 [DTMF DIALER]
#8 [DTMF SET]
#1 [CH COUNTER]
#2 [EDGE BEEP]
#3 [RESUME]
#4 [SCAN LAMP]
#5 [SMART SEARCH]
#6 [SPEC-ANALYZER 1]
#7 [SPEC-ANALYZER 2]
#1 [SENSOR DISPLAY]
#2 [WAVE MONITOR]
#3 [TEMP UNIT]
#4 [BARO UNIT]
#5 [BARO OFFSET]
#6 [ALTITUDE UNIT]
#7 [ALTITUDE OFFSET]
#1 [APO]
#2 [RX SAVE]
#3 [TX SAVE]
#4 [TOT]
#5 [ON TIMER]
#6 [OFF TIMER]
#1 [ARTS BEEP]
#2 [ARTS INTERVAL]
#3 [CW ID]
#1 [BCLO]
#2 [HOME/REV]
#3 [MON/T-CAL]
#4 [MON-F CHANGE]
#5 [EMG SET]
#6 [HALF DEVIATION]
#7 [VOX SENS]
#8 [VOX DELAY]
#9 [BAND LINK]
#10 [VFO MODE]
#11 [FONT EDITOR]
#12 [ICON SET]
#13 [ICON EDITOR]
#14 [ICON SELECT]
#15 [CLOCK SHIFT]
#16 [TIME SET]
#17 [LANGUAGE]
#18 [ATT]
#19 [MIC MONITOR]
#20 [WX ALERT]
TSQ/DCS/DTMFScan ModesMeasurementSave ModesARTSMisc Setup
85


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-7R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-7R in the language / languages: English as an attachment in your email.

The manual is 4,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info