647896

Yaesu VX-5R Manual

50
Zoom out
Zoom in
Previous page
1/76
Next page
VX-5R OPERATING MANUAL48
H
OW
TO
S
KIP
(
O
MIT
)
A
C
HANNEL
D
URING
M
EMORY
S
CAN
O
PERATION
As mentioned previously, some continuous-carrier stations like a Weather Broadcast sta-
tion will seriously impede scanner operation if you are using the “Carrier Drop” Scan-
Resume mode, as the incoming signal will not pause long enough for the transceiver to
resume scanning. Such channels may be “Skipped” during scanning, if you like:
•
Set the radio to the Memory Mode by pressing the
[
MR
(
SKP
)
SC
]
key, if necessary.
‚
Rotate the DIAL to select the Memory Channel to be skipped during scanning.
ƒ
Press the
[
F/W
]
key momentarily (not for one second), then press the
[
MR
(
SKP
)
SC
]
key (momentarily). A small “t” icon will appear to the left of the memorized fre-
quency, indicating it is to be ignored during scanning.
To re-institute the channel into the scanning loop, repeat the above three steps (the “skipped”
channel will, of course, still be accessible via manual channel selection methods using the
DIAL in the MR mode).
PREFERENTIAL MEMORY SCAN
The VX-5R also allows you to set up a “Preferential Scan List” of channels which you can
“flag” within the memory system. These channels are designated by a “
ee
ee
e” icon when you
have selected them, one by one, for the Preferential Scan List. When you initiate memory
scanning on a channel with the “
ee
ee
e ” icon appended, only those channels bearing the “
ee
ee
e”
icon will be scanned. If you initiate scanning on a channel which does not have the “
ee
ee
e”
icon appended, you will scan all channels including those with the “
ee
ee
e” icon appended.
Here is the procedure for setting up and using the Preferential Scan List:
•
Press the
[
MR
(
SKP
)
SC
]
key momentarily to enter the Memory Recall mode, if you
are not using memories already.
‚
Rotate the DIAL to select the channel which you wish to add to the Preferential Scan List.
ƒ
Press the
[
F/W
]
key, then press the
[
MR
(
SKP
)
SC
]
key. The “t” icon will appear
beside the channel number. Now press the
[
F/W
]
key, then press the
[
MR
(
SKP
)
SC
]
key again. The “t” icon will be replaced by the “
ee
ee
e” icon, indicating that the channel
is now in the Preferential Scan List.
To initiate Preferential Memory Scan:
•
Press the
[
MR
(
SKP
)
SC
]
key momentarily to enter the Memory Recall mode, if you
are not using memories already.
‚
Rotate the DIAL to select any channel which has an “
ee
ee
e” icon appended to the channel
number.
ƒ
Press and hold in the
[
MR
(
SKP
)
SC
]
key for one second to initiate Preferential Memory
Scanning. Only the channels which have an “
ee
ee
e” icon appended to the channel number
will be scanned.
Scanning
… 50 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-5R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-5R in the language / languages: English as an attachment in your email.

The manual is 1,5 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info