478487
34
Zoom out
Zoom in
Previous page
1/132
Next page
VX-3R OPERATING MANUAL32
This is different from the usual method of restoring normal operation, and it applies only to
the configuration of the CTCSS/DCS frequencies. Remember to restore the default setting
R-N.T-NR-N.T-N
R-N.T-NR-N.T-N
R-N.T-N” (Receive and transmit the Normal DCS Tone) when done.
TONE SEARCH SCANNING
In operating situations where you don’t know the CTCSS or DCS tone being used by
another station or stations, you can command the radio to listen to the incoming signal and
scan in search of the tone being used. Two things must be remembered in this regard:
You must be sure that your repeater uses the same tone type (CTCSS vs. DCS).
Some repeaters do not pass the CTCSS tone. You may have to listen to the station(s)
transmitting on the repeater uplink (input) frequency in order to allow Tone Search
Scanning to work.
To scan for the tone in use:
1. Set the radio up for either CTCSS or DCS
Decoder operation (see the previous discus-
sions). In the case of CTCSS, “ ” will
appear on the display; in the case of DCS,
” will appear on the display.
2. Press and hold in the
[
TXPO
]
key for one second to enter the Set mode.
3. Rotate the DIAL knob to select Set Mode
Item 86:
TN FRQTN FRQ
TN FRQTN FRQ
TN FRQ when TONE SQL is se-
lected, or Set Mode Item 24:
DCS CDDCS CD
DCS CDDCS CD
DCS CD dur-
ing DCS operation.
Note: Do not forget to pull the DIAL knob to rotate the DIAL knob.
4. Press the
[
TXPO
]
key momentarily to enable
adjustment of the selected Set Mode Item.
5. Press and hold in the
[
BAND
]
key for one
second, until “
T SRCHT SRCH
T SRCHT SRCH
T SRCH” (for CTCSS Tone
Search) or “
D SRCHD SRCH
D SRCHD SRCH
D SRCH” (for DCS Tone Search)
appears on the display, then release the
[
BAND
]
key to start scanning for the incom-
ing CTCSS or DCS tone/code.
6. When the radio detects the correct tone or code, it will halt on that tone/code, and
audio will be allowed to pass. Press the
[
BAND
]
key to lock in that tone/code, then
press PTT switch to exit to normal operation.
DCS OPERATION
CTCSS/DCS/EPCS OPERATION
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-3R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-3R in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info