478487
12
Zoom out
Zoom in
Previous page
1/132
Next page
VX-3R OPERATING MANUAL10
Hi! I’m R. F. Radio, and I’ll be helping you along as you learn the many fea-
tures of the VX-3R. I know you’re anxious to get on the air, but I encourage you
to read the “Operation” section of this manual as thoroughly as possible, so
you’ll get the most out of this fantastic new transceiver. Now. . .let’s get operating!
SWITCHING POWER ON AND OFF
1. Be sure the Battery Pack is installed, and that the battery is fully charged. Connect the
antenna to the top panel ANTENNA jack.
2. Press and hold in the orange POWER switch (on the left
side of the transceiver) for one second. Two beeps will be
heard when the switch has been held long enough, and the
current DC supply voltage will appear on the display for 2
seconds. If you are using the FNB-82LI Battery Pack, the
small “
LitLit
LitLit
Lit” icon at the top of the display confirms that the
Lithium-Ion Battery Pack has been detected. After this 2-second interval, the display
will resume its normal indication of the operating frequency.
3. To turn the VX-3R off, press and hold in the orange POWER switch again for one
second.
1) If you don’t hear the two “Beep” tones when the radio comes on, the Beeper
may have been disabled via the Set Mode Item 14: BP SEL. See page 19,
which tells you how to reactivate the Beeper.
2) You can change the Opening Message (DC supply voltage indication) to any desired
message (up to 6 characters) via Set Mode Item 59: OPN.MSG; see page 115 for details.
ADJUSTING THE VOLUME LEVEL
Pull the DIAL knob to unlock the mechanical dial lock, then
rotate the DIAL knob while pressing and holding the
[
VOL
]
key
to set the desired audio level. Clockwise rotation increases the
volume level.
1) You may set the Audio Output Level to the
Speaker, and the Earphone Output Level individu-
ally. The “SP” notation (which means Speaker) appears in the Memory Chan-
nel Number display slot while adjusting the Speaker Output Level. The “HP” notation
(which means Headphone) appears in the Memory Channel Number display slot while
adjusting the Earphone Output Level.
2) When pressing the [F/W] key followed by the [VOL] key, the DIAL knob function
changes to the Volume Level selection instead of the frequency control. In this case, the
“VOL” notation on the display blinks. Pressing the [F/W] key followed by the [VOL] key
again, the DIAL knob function returns to the frequency control. Furthermore, you may
change the [VOL] key function via Set Mode Item 92: VOL MD. See page 101 for details.
OPERATION
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-3R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-3R in the language / languages: English as an attachment in your email.

The manual is 4,3 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info