478480
22
Zoom out
Zoom in
Previous page
1/44
Next page
VX-150 OPERATING MANUAL20
Repeat the previous step to program the remaining letters, numbers, or symbols of the
desired label. A total of seven characters may be used in the creation of a label.
When you have completed the creation of the label, press the
[
F
]
key, then press the
PTT to save the label and exit to normal operation.
To activate Alphanumeric Tags:
Press the
[
F
]
key, then press the
[
0
(
SET
)]
key, to enter the Set mode.
Rotate the DIAL to select Menu #1 (“ALPHA”).
Press the
[
F
]
key to enable changing of this Menu item.
Rotate the DIAL to set the “ALPHA”.
When you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
MASKING MEMORIES
There may be situations where you want to “Mask” memories so they are not visible during
memory selection or scanning. For example, several memories used only in a city you visit
infrequently may be stored, then “Masked” until you visit that city, at which time you can
“Unmask” them for normal use.
Press the
[
MR
(
SKIP
)]
key, if needed, to enter the MR mode.
Press and hold in the
[
F
]
key for 1/2 second, then rotate the DIAL to select the memory
channel to be “Masked” from view.
Press the
[
MR
(
SKIP
)]
key. The display will revert to memory channel #1. If you rotate
the DIAL to the location you just “Masked,” you will observe that it is now invisible.
To Unmask the hidden memory, repeat the above procedure: press and hold in the
[
F
]
key for 1/2 second, rotate the DIAL to select the masked memory’s number, then press
[
MR
(
SKIP
)]
to restore the memory channel’s data.
MEMORY ONLY MODE
This allows operation only on stored memories, which are displayed by name (if any) at the
right, and the memory channel number to the left. No frequency is displayed, and only
CH.nn” will appear if you haven’t assigned an Alphanumeric name to a memory.
Repeater shift and tone setting indicators are displayed in the Memory Only mode, al-
though they cannot be changed.
Here is the procedure for activating the Memory Only mode:
Turn the radio off.
Press and hold the
[
PTT
]
and
[
LAMP
]
key while turning the radio on.
Rotate the DIAL to select “MEM.ONLY”.
Press the
[
F
]
key momentarily to initialize the radio.
Repeat the previous step to return to normal operation.
Memory Operation
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-150 in the language / languages: English as an attachment in your email.

The manual is 0,46 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info