478478

Yaesu VX-127 Manual

55
Zoom out
Zoom in
Previous page
1/88
Next page
VX-127 OPERATING MANUAL 53
OFF: No alert beeps will be heard; you must look at the display to confirm current
ARTS™ status.
To activate the ARTS™ feature:
1. Set your radio and the other radio(s) to the same DCS code
number, per the discussion on page 24.
2. Press the
[
SET
( )
EMG
]
key momentarily to enter the Set mode.
3. Rotate the DIAL knob to select Set Mode Item 2: ARTS.
4. Press the
[
F
]
key momentarily to enable adjustment of this Set
Mode Item.
5. Rotate the DIAL knob to select the desired ARTS™ Beep mode
(see above).
6. Press the
[
F
]
key mamentarily. You will observe the “OUT. RNG”
display on the LCD below the operating frequency. ARTS™
operation has now commenced.
7. Every 25 seconds, your radio will transmit a “polling” call to the
other station. When that station responds with its own ARTS™
polling signal, the display will change to “IN.RNG” to confirm
that the other station’s polling code was received in response to yours.
8. Press the
[
F
]
key momentarily to exit ARTS™ operation and resume normal functioning
of the transceiver.
U.S. users should confirm the current status of §97.201(b) of the FCC’s rules
governing the 430 MHz band of the Amateur service before utilizing this
feature.
ARTS™ Polling Time Options
The ARTS™ feature may be programmed to poll every 25 seconds (default value) or 15
seconds. The default value provides maximum battery conservation, because the polling
signal is sent out less frequently. To change the polling interval:
1. Press the
[
SET
( )
EMG
]
key momentarily to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 3: AR INT.
3. Press the
[
F
]
key momentarily to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the desired polling interval (15
or 25 seconds).
5. When you have made your selection, press the PTT switch to
save the new setting and exit to normal operation.
ARTS™
(
A
UTOMATIC RANGE TRANSPONDER SYSTEM
)
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-127 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info