478478
35
Zoom out
Zoom in
Previous page
1/88
Next page
VX-127 OPERATING MANUAL 33
MEMORY MODE
MEMORY BANK OPERATION
The large number of memories available in the VX-127 could be difficult to utilize without
some means of organizing them. Fortunately, the VX-127 includes provision for dividing
the memories into as many as ten Memory Banks, so you can categorize the memories in a
manner convenient to you.
Assigning Memories to a Memory Bank
1. Recall the memory channel to be assigned to a Memory Bank.
2. Press and hold in the
[
VFO
(
PRI
)]
key for one second, then ro-
tate the DIAL knob to select the Memory Bank number you want
as the Memory Bank for this channel (“BANK 1” ~
BANK10”).
3. Press and hold in the
[
F
]
key for one second to copy the memory
channel data into the Memory Bank.
1) You may assign one memory channel into multiple Memory Banks.
2) The PMS memory channels (L1/U1 through L10/U10) may not be as-
signed to a Memory Bank.
Memory Bank Recall
1. Press the
[
MR
(
SKIP
)]
key, if needed, to enter the Memory Re-
call mode.
2. Press and hold in the
[
VFO
(
PRI
)]
key, then rotate the DIAL
knob to select the desired Memory Bank (“BANK 1” through
BANK10”).
3. Press the
[
MR
(
SKIP
)]
key momentarily; now, as you rotate the
DIAL knob to select memories, you will observe that you can
only select memory channels in the current memory bank. The
” indication will appear at the left side of the frequency display while operating
within a Memory Bank.
4. To change to another Memory Bank, press and hold in the
[
VFO
(
PRI
)]
key, rotate the
DIAL knob to select the new Memory Bank, then press the
[
MR
(
SKIP
)]
key momentarily.
5. To exit from Memory Bank operation, select “NOBANK” in
step 4 above. You are now in the “standard” Memory Recall
mode, without utilization of the Memory Banks. The memories
stored in the various Banks will remain in those banks, however;
you do not need to store them again.
Removing Memories from a Memory Bank
1. Recall the memory channel to be removed from a Memory Bank.
2. Press and hold in the
[
VFO
(
PRI
)]
key for one second, then press and hold in the
[
F
]
key
to remove the memory channel data from the Memory Bank.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-127 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-127 in the language / languages: English as an attachment in your email.

The manual is 2,11 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info