478477
72
Zoom out
Zoom in
Previous page
1/88
Next page
VX-120 OPERATING MANUAL70
SET
(
MENU
)
M
ODE
REPEA TER SETTING
Enables/Disables the Automatic Repeater Shift function.
Sets the Repeater Shift Direction.
Sets the magnitude of the repeater Shift.
CTCSS/DSC/DTMF/EPCS SETTING
Selects the number of CTCSS/DCS Bell ringer repetitions.
Setting of the DCS code.
Enables/Disables “Inverted” DCS code decoding.
Setting of the DTMF Autodialer Delay Time.
Setting of the DTMF Autodialer Sending Speed.
Programming of the DTMF Autodialer.
Setting the Receiver Pager Code for the Enhanced CTCSS
Paging & Code Squelch.
Setting the Transmitting Pager Code for the Enhanced
CTCSS Paging & Code Squelch.
Enables/Disables split CTCSS/DCS coding.
Selects the Tone Encoder and/or Decoder mode.
Setting of the CTCSS Tone Frequency.
ARTS SETTING
Selects the Beep option during ARTS operation.
Selects the Polling Interval during ARTS operation.
Enables/disables the CW identifier during ARTS operation.
Programs and activates the CW Identifier (used during ARTS
operation).
MEMORY SETTING
Toggles the display indication between “frequency” and the
channel’s “Alpha/Numeric Tag.”
Stores Alpha-Numeric “Tags” for the Memory channels.
SCAN SETTING
Selects the Scan Resume mode.
Enables/disables the Priority Revert feature.
Selects the Memory Scan channel-selection mode.
Enables/Disables the Scan lamp while paused.
Selects the Memory Scan “Skip” channel-selection mode.
Enables/Disables the Weather Alert Scan feature.
POWER SAVER SETTING
Selects the Receive-mode Battery Saver interval (“sleep”
ratio).
Enables/Disables the Transmitter Battery Saver.
WIRES™ SETTING
Selects the Internet Link Connection mode.
Selects the Access Number (DTMF digit) for WIRES™ op-
eration.
Selects the memory register for an Access Number (DTMF
digit) for non-WIRES™.
SET MODE ITEM
4
[
ARS
]
35
[
RPT.MOD
]
41
[
SHIFT
]
SET MODE ITEM
7
[
BELL
]
13
[
DCS.COD
]
14
[
DCS.N/R
]
15
[
DT DLY
]
16
[
DT SPD
]
17
[
DT WRT
]
18
[
ECS.CDR
]
19
[
ECS.CDT
]
43
[
SPLIT
]
44
[
SQL.TYP
]
46
[
TN FRQ
]
SET MODE ITEM
2
[
ARTS
]
3
[
AR INT
]
10
[
CWID
]
11
[
CW WRT
]
SET MODE ITEM
28
[
NAME
]
29
[
NM WRT
]
SET MODE ITEM
32
[
RESUME
]
36
[
PRI.RVT
]
39
[
SCN MD
]
40
[
SCN.LMP
]
42
[
SKIP
]
52
[
WX ALT
]
SET MODE ITEM
37
[
RXSAVE
]
49
[
TXSAVE
]
SET MODE ITEM
22
[
I NET
]
23
[
INT CD
]
24
[
INT MR
]
AVAILABLE VALUES
(
DEFAUL T
)
ARS. ON / ARS.OFF
RPT.OFF / RPT.
/ RPT. +
(
)
0.00 - 99.95 MHz
(
)
AVAILABLE VALUES
(
DEFAUL T
)
OFF / 1T / 3T / 5T / 8T / CONT
104 standard DCS codes
(
023
)
T/RX N, RX R, TX R, T/RX R
50MS / 100MS / 250MS / 450MS /
750MS / 1000MS
50MS /100MS
(
R05
_
47
)
(
T05
_
47
)
SPL.OFF / SPL. ON
OFF / TONE / TSQL /
REV TN / DCS
50 standard CTCSS tones
(
100 Hz
)
AVAILABLE VALUES
(
DEFAUL T
)
INRANG / ALWAYS / OFF
25 SEC / 15 SEC
TX OFF / TX ON
AVAILABLE VALUES
(
DEFAUL T
)
FREQ / ALPHA
AVAILABLE VALUES
(
DEFAUL T
)
BUSY / HOLD / TIME
RVT.OFF / RVT. ON
ONLY / MEM
ON / OFF
OFF / SKIP / ONLY
ALT.OFF / ALT. ON
AVAILABLE VALUES
(
DEFAUL T
)
200 MS / 300 MS / 500 MS /
1 S / 2 S / OFF
SAV.OFF / SAV. ON
AVAILABLE VALUES
(
DEFAUL T
)
INT.OFF / INT.COD / INT.MEM
CODE 0 - CODE 9,
CODE A - CODE F,
(
CODE 1
)
d1 - d9
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-120 in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info