478477

Yaesu VX-120 Manual

59
Zoom out
Zoom in
Previous page
1/88
Next page
VX-120 OPERATING MANUAL 57
DTMF PAGER OPERATION
(
REQUIRES OPTIONAL FTD-7
)
When you activate the ANI (Automatic Number Identification) feature during DTMF Pager
operation, the DTMF tones stored in ANI memory will automatically be sent whenever
you press the PTT switch. When the ANI is received, the LCD will displays the received
ANI code after the 3-digit DTMF pager code.
Storing the ANI code
1. Press the
[
F
]
key, then press the
[
LOW
(
LOCK
)
SET
]
key, to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 54: ANI.WRT.
3. Press the
[
F
]
key momentarily to display any previously-stored ANI code.
4. Press the
[
F
]
key again to clear any previous ANI code.
5. Rotate the DIAL knob to select the first number/letter (0-9, A, B, C, D, E (substitute
for “”), and F (substitute for “#”), then press the
[
F
]
key momentarily to save the
first letter/number and move on to the next character.
6. Repeat the previous step, as many times as necessary (up to 16 characters), to com-
plete ANI code. If you make a mistake, press the
[
(
MHz
)]
key to move back to the
previous letter/number’s slot, then re-select the correct letter/number.
7. When you have finished entering the ANI code and it contains less than 16 characters,
press and hold in the
[
F
]
key for one second to confirm the callsign. (if the ANI code
has exactly 16 characters, you do not need to press and hold in
[
F
]
in this step).
8. Press the PTT switch to save the settings and exit to normal operation.
You may check your work by monitoring the entered callsign. To do this,
repeat steps 1- 7 above, then press the MONI switch.
Activating the ANI feature
1. Press the
[
F
]
key, then press the
[
LOW
(
LOCK
)
SET
]
key, to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 53: ANI.
3. Press the
[
F
]
key momentarily to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select “ON.”
5. Press the PTT switch to save the new setting and activate the
ANI feature.
6. Press the PTT switch to send the DTMF tones stored in ANI
memory after the 3-digit DTMF pager code which is stored in the last-selected DTMF
Pager Memory register.
7. When you receive a ANI code, the LCD will displays the re-
ceived ANI code after the 3-digit DTMF pager code. You may
scroll the received ANI code by rotating the DIAL knob.
8. To disable the ANI feature, just repeat the above procedure, ro-
tating the DIAL knob to select “OFF” in step 4 above.
ANI CODE
FLAGPAGER CODE
… 59 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-120 in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info