478477

Yaesu VX-120 Manual

55
Zoom out
Zoom in
Previous page
1/88
Next page
VX-120 OPERATING MANUAL 53
DTMF OPERATION
The VX-120 is provided the Nine DTMF Autodial memories which allowing you to store
telephone numbers for autopatch use. You can also store short autopatch or Internet-link
access code streams so as to avoid having to send them manually.
Here is the DTMF Autodial storage procedure:
1. Press the
[
F
]
key, then press the
[
LOW
(
LOCK
)
SET
]
key to enter the Set mode.
2. Rotate the DIAL knob to select Set Mode Item 17: DT WRT.
3. Press the
[
F
]
key momentarily to enable adjustment of this Set
Mode Item.
4. Rotate the DIAL knob to select the DTMF Memory register (“d1”
~ “d9”) into which you wish to store this DTMF string.
5. Press the
[
F
]
key momentarily to begin DTMF Memory entry
into the selected register.
6. Rotate the DIAL knob to select the first digit of the DTMF string.
Selectable entries are 0 - 9, and A - F, with E and F representing
DTMF “” and “#” tones respectively.
7. Press the
[
F
]
key to accept the first digit and move to the next digit of the DTMF string.
8. Repeat steps 6 and 7 until you have completed the telephone
number.
9. If you make a mistake, press the
[
(
MHz
)]
key to move back to
the previous digit, then re-select the correct number.
10. Press and hold in the
[
F
]
key for one second to save the setting.
11. If you store other numbers, repeat steps 4- 10 above, using a
different DTMF memory register.
12. When all required DTMF memories are filled to your satisfaction, press the PTT
switch to save the settings and exit to normal operation
To send the Telephone Number, Hold the PTT switch to continue transmitting during
following steps:
1. Press the
[
(
MHz
)]
or
[
(
MHz
)]
key to select the DTMF Memory register (“d1” ~
“d9”) you wish send.
2. Press the
[
LOW
(
LOCK
)
SET
]
key momentarily to transmit the tone string. Once the
string begins, you may release the PTT switch, as the transmitter will be held “on the
air” until the DTMF string is completed.
You can change the DTMF Audodialer sending speed, using Set Mode Item 16: DT SPD.
See page 73 for details.
You can also set a longer delay between the time you press the numerical key (correspond-
ing to the DTMF memory string; with PTT switch pressed) and the instant when the first
DTMF digit is sent, using Set Mode Item 15: DT DLY. See page 73 for details.
… 55 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-120 in the language / languages: English as an attachment in your email.

The manual is 2,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info