478476
29
Zoom out
Zoom in
Previous page
1/40
Next page
VX-110 OPERATING MANUAL 27
ARTS POLLING TIME OPTIONS
The ARTS feature may be programmed to poll every 15 seconds (default value) or 25
seconds. The default value provides maximum battery conservation, because the polling
signal is sent out less frequently. To change the polling interval:
Press the
[
F
]
key, then press the
[
M/V
(
SET
)
]
key, to enter the Set mode.
Rotate the DIAL to select Menu #14 (“AR ITVL”).
Press the
[
F
]
key to enable changing of this Menu item.
Rotate the DIAL to select the desired polling interval (15 or 25 seconds).
When you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
ARTS ALERT BEEP OPTIONS
The ARTS feature allows two kinds of alert beeps (with the additional option of turning
them off), so as to alert you to the current status of ARTS operation. Depending on your
location and the potential annoyance associated with frequent beeps, you may choose the
Beep mode which best suits your needs. The choices are:
INRANGE: The beeps are issued only when the radio first confirms that you are within
range, but does not re-confirm with beeps thereafter.
ALWAYS: Every time a polling transmission is received from the other station, the alert
beeps will be heard.
ARB OFF: No alert beeps will be heard; you must look at the display to confirm current
ARTS status.
To set the ARTS Beep mode, use the following procedure:
Press the
[
F
]
key, then press the
[
M/V
(
SET
)]
key, to enter the Set mode.
Rotate the DIAL to select Menu #13 (“ARTS BP”).
Press the
[
F
]
key to enable changing of this Menu item.
Rotate the DIAL to select the desired ARTS Beep mode (see above).
When you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
CW IDENTIFIER SETUP
The ARTS feature includes a CW identifier. Every ten minutes during ARTS operation, the
radio can be instructed to send “DE (your callsign) K” if this feature is enabled. The
callsign field may contain up to 16 characters.
Here’s how to program the CW Identifier:
Press the
[
F
]
key, then press the
[
M/V
(
SET
)
]
key, to enter the Set mode.
Rotate the DIAL to select Menu #27 (“CW ID”).
ARTS
(
Automatic Range Transponder System
)
Operation
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-110 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info