478476
24
Zoom out
Zoom in
Previous page
1/40
Next page
VX-110 OPERATING MANUAL22
Scanning
MEMORY SCANNING
Memory scanning is similarly easy to initiate:
Set the radio to the Memory mode by pressing the
[
M/V
(
SET
)]
key, if necessary.
Press and hold in the
[
s
]
/
[
t
]
key for 1/2 second to initiate scanning.
As with VFO scanning, the scanner will halt on any signal encountered that is strong
enough to open the squelch; it will then resume scanning according to the Scan-Re-
sume mode set previously.
To cancel scanning, press the PTT, or
[
M/V
(
SET
)]
key.
H
OW
TO
S
KIP
(
O
MIT
)
A
C
HANNEL
D
URING
M
EMORY
S
CAN
O
PERATION
When you have some very active channels stored in memories, you may wish to skip them
when scanning, but still have them available for manual selection.
Such channels may be “Skipped” during scanning, if you like:
Set the radio to the Memory Mode by pressing the
[
M/V
(
SET
)]
key, if necessary.
Rotate the DIAL to select the Memory Channel to be skipped during scanning.
Press the
[
F
]
key momentarily (not for 1/2 second), then press the
[
M/V
(
SET
)]
key
(momentarily). A small “SKIP” will appear to the LCD. indicating it is to be ignored
during scanning.
To re-institute the channel into the scanning loop, repeat the above three steps (the “Skipped”
channel will, of course, still be accessible via manual channel selection methods using the
DIAL in the MR mode).
AUTOMATIC LAMP ILLUMINATION ON SCAN STOP
The VX-110 will automatically illuminate the LCD Lamp whenever the scanner stops on a
signal (the default condition for this feature is “ON”).
The procedure for disabling the Scan Lamp is:
Press the
[
F
]
key, then press the
[
M/V
(
SET
)
]
key, to enter the Set mode.
Rotate the DIAL to select Menu #7 (“SCN LMP”).
Press the
[
F
]
key to enable changing of this Menu item.
Rotate the DIAL to set this Menu item to OFF.
When you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-110 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info