478476
12
Zoom out
Zoom in
Previous page
1/40
Next page
VX-110 OPERATING MANUAL10
RECEIVE BATTERY SAVER SETUP
An important feature of the VX-110 is its Receive Battery Saver, which “puts the radio to
sleep” for a time interval, periodically “waking it up” to check for activity. This feature
significantly reduces quiescent battery drain, and you may change the amount of “sleep”
time between activity checks using the Menu System:
Press the
[
F
]
key, then press the
[
M/V
(
SET
)]
key to enter the Set mode.
Rotate the DIAL to select Menu Item #8 (“RX SAVE”).
Press the
[
F
]
key to enable adjustment of this Menu item.
Rotate the DIAL to select the desired “Sleep” duration. The selections available are
200 ms, 300 ms, 500 ms, 1 second, and 2 seconds, or OFF. The default value is 200 ms.
When you have made your selection, press the PTT key to save the new setting and exit
to normal operation.
When you are operating on Packet, switch the Receive Battery Saver OFF, as the sleep
cycle may “Collide” with the beginning of an incoming Packet transmission, causing
your TNC not to receive the full data burst. Likewise, during voice operation, part of the
first word of an incoming transmission maybe cut off during (normal) Battery Saver
operation.
TX BATTERY SAVER
The VX-110 also includes a useful Transmit Battery Saver, which will automatically lower
the power output level when the last signal received was very strong. With the Transmit
Battery Saver, the automatic selection of Low Power operation conserves battery drain
significantly.
To activate the Transmit Battery Saver:
Press the
[
F
]
key, then press the
[
M/V
(
SET
)
]
key to enter the Set mode.
Rotate the DIAL to select Menu Item #9 (“TX SAVE”).
Press the
[
F
]
key to enable adjustment of this Menu item.
Rotate the DIAL so as to select ON (thus activating the Transmit Battery Saver).
When you have completed your selection, press the PTT key to save the new setting
and exit to normal operation.
KEYPAD/LCD ILLUMINATION
Your VX-110 includes a reddish illumination lamp which aids in nighttime operation. Three
options for activating the lamp are provided:
KEY : Pressing any key (except PTT) causes the lamp to provide illumination for 5
seconds, after which the lamp will automatically shut off.
5SEC : Pressing the LAMP switch momentarily causes the lamp to provide illumina-
tion for 5 seconds, after which the lamp will automatically shut off.
Advanced Operation
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-110 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info