478476

Yaesu VX-110 Manual

9
Zoom out
Zoom in
Previous page
1/40
Next page
VX-110 OPERATING MANUAL 7
FREQUENCY NAVIGATION
Make sure the keypad is unlocked, and press the
[
M/V
(
SET
)
]
button, if necessary, to select
the VFO mode.
You have several ways to tune the VX-110: in selectable channel steps or 1 MHz steps with
the
[
s
]
/
[
t
]
keys; and the DIAL knob.
Use the DIAL knob to tune the displayed VFO frequency at the current channel step rate.
You can also press the
[
s
]
/
[
t
]
keys momentarily to do this, but if you press the
[
s
]
or
[
t
]
key for more than 1/2-second, scanning will start. This is described later, so for now,
just press the
[
s
]
or
[
t
]
key again to stop (if you have to).
To change the MHz range of the VFO, you can press the
[
F
]
key followed by the
[
s
]
or
[
t
]
key (or turn the DIAL knob). Note the beeps when using the
[
s
]
/
[
t
]
keys when
moving up or down. When done press
[
F
]
again, or just wait five seconds.
CHANGING THE TRANSMITTER POWER LEVEL
You can select between a total of three transmitter power levels on your VX-110. The exact
power output will vary somewhat, depending on the voltage supplied to the transceiver.
With the standard FNB-64 Battery Pack, the power output levels available are:
HIGH: 5 W MID: 2 W LOW: 0.5 W
To change the power level:
Press the
[
F
]
key, then immediately press the
[
LOW
(
SKIP
)
]
key.
Now rotate the DIAL knob to select “LOW”, “MID,” or “HIGH”.
Press the PTT key to save the new setting and exit to normal operation.
CHANGING THE CHANNEL STEPS
To change the frequency steps used during manual tuning, follow the procedure below:
Press the
[
F
]
key, then immediately press the
[
M/V
(
SET
)
]
key to enter the Set mode.
Rotate the DIAL to select Menu Item #5 (“STEP”).
Press the
[
F
]
key to enable modification of the current setting.
Now rotate the DIAL knob to select 5, 10, 12.5, 15, 20, 25, or 50 kHz steps.
Press the PTT key to save the new setting and exit to normal operation.
Basic Operation
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu VX-110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu VX-110 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info