674727
210
Zoom out
Zoom in
Previous page
1/221
Next page
210
Appendix
Whenyouhavedifficulties...
Caution
Check the following before requesting for repair services.
Thereisnopower
z Is the external power supply connected correctly?
Connect the black wire to the negative (-) terminal and the red wire to the positive (+) terminal.
z Is the voltage and current capacity of the external power supply sufficient?
Check the voltage (13.8 V) and current capacity (20 A or above) of the external power supply.
z Is the fuse broken?
Replace the fuse.
Thereisnosound
z Is the squelch level or setting too high?
Adjust the squelch level when receiving weak signals.
z Is the volume low?
Increase the volume by turning the VOL knob in a clockwise direction.
z Is the tone squelch or DCS turned on?
When the tone squelch or DCS is turned on, no sound will be heard until signals containing the same
tone frequency, or DCS code that have been set are received.
z Is the external speaker connected?
Connectaspeakerwithanimpedanceof4to16Ωcorrectly.
z Is the Bluetooth headset in use?
Disable the use of the headset or use the set-up menu to allow sound to come from both the headset
and the main body speaker.
Thereisnotransmission
z Is the PTT switch pressed properly?
z Is the microphone connected correctly?
Plug the connector all the way into the MIC jack.
z Is the transmission frequency set to the amateur band?
Transmission outside the amateur band is not possible.
z Is the antenna or co-axial cable broken?
Replace the antenna or co-axial cable.
z Is the voltage of the external power supply normal?
When the voltage of the power supply drops during transmit, the transceiver may not work properly.
Use a stable DC power supply with a voltage of 13.8 V and a current capacity of 20 A.
Thekeysorknobswillnotoperate
z Is the lock function activated?
Cancel the lock by pressing the POWER / LOCK key.
210


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-400XDR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-400XDR in the language / languages: English as an attachment in your email.

The manual is 78,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info