674728
30
Zoom out
Zoom in
Previous page
1/221
Next page
30
Installation and Connection
ConnectingthePowerSupply
Connectingthecarbattery
When using this radio as a mobile unit, connect the DC power supply cable to the
negative ground 12 V car battery.
Cautions
z Use the radio in a car with a negative ground 12 V DC system, where the minus (-) pole of the
battery is connected to the car body.
z Do not connect the radio to the 24 V battery of a large vehicle.
z Do not use the cigarette lighter inside the car as a power source.
(1)Cableroutingfrominsidethecartotheenginecompartment
Rout the DC power supply cable to the engine compartment, passing it through a
grommet in the fire wall from the passenger side.
1 Feed a hardened wire from the engine compartment through the grommet into the
interior of the car
2 Hook the end of the “feed” wire with the “bare wire” end of the provided DC power
supply cable
3 Fold and bend the ends of the wires and wind insulation tape around them
4 Pull the “feed” wire back into the engine compartment
The DC power supply cable will be pulled through the grommet into the engine
compartment.
5 Peel off the tape and remove the DC power supply cable from the “feed” wire
テー
かための針金
グロメッ
バッテリー(12V)
①グロメトに通させる
DC電源
ケーブル
無線機本体
Hardened wire
Grommet
Battery (12V)
Tape
DC power
supply cable
(accessory)
DC power
supply
cable
Pass the cable through the grommet
Radio main
body
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-400XDE at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-400XDE in the language / languages: English as an attachment in your email.

The manual is 78,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info