478471
54
Zoom out
Zoom in
Previous page
1/60
Next page
FTM-350 SERIES OPERATING MANUAL52
SPECIAL FUNCTION MENU
Static electricity may occasionally cause erratic or unpredictable operation of the micropro-
cessor. If this happens, resetting of the microprocessor may restore normal operation. Note
that resetting the microprocessor will erase all memories.
1. Turn the radio “off”.
2. Turn the radio on while pressing and holding the key which is located to the left of the
[
POWER
]
switch to enter the “Special Function” mode.
3. Rotate the left side
[
DIAL
]
knob to select one of the following items:
1 CLONE RX: Uses this item for transceiver cloning. See the next page for details.
2 CLONE TX: Uses this item for transceiver cloning. See the next page for details.
3 L-MEMORY SORT: Sorts and renumbers the memory channels of the left side
memory bank by frequency, from low to high. See page 10
for details.
4 R-MEMORY SORT: Sorts and renumbers the memory channels of the right side
memory bank by frequency, from low to high. See page 10
for details.
5 SYSTEM RESET: Resets the Set Mode item settings (except “APRS/PKT”
group) to their factory defaults.
6 ALL RESET: Clears all memories and other settings to factory defaults.
7 APRS RESET: Resets only the Set Mode item setting of the “APRS/PKT”
group to their factory defaults.
8 BAND SCOPE: Switches the Band Scope operation to the Enhanced Mode.
See page 13 for details.
9 B-T PAIRING: Set up the Bluetooth
®
device. See page 18 for details.
10 GPS DATUM: Select the GPS datum to be used.
11 XBAND REPEATER: Activates Cross Band Repeater operation. Set the right band
to a 144 MHz frequency and the left band to a 430MHz
frequency (or vice versa) before beginning this procedure.
4. Once you have made your selection in step 3, press the left side
[
DIAL
]
knob and
confirm that
(
OK?
[
SET
])
is displayed on the LCD. Press the left side
[
DIAL
]
knob
once more to complete the reset procedure. (To cancel the reset procedure, press the
[
ESC
]
key before pressing the left side
[
DIAL
]
knob.)
54


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-350 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-350 Series in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info