478471
51
Zoom out
Zoom in
Previous page
1/60
Next page
FTM-350 SERIES OPERATING MANUAL 49
The FTM-350 Series Transceiver includes a convenient “Clone” feature, which allows the
memory and configuration data from one transceiver to be transferred to another FTM-350
Series Transceiver. This can be particularly useful when configuring a number of transceiv-
ers for a public service operation. Here is the procedure for Cloning one radio’s data to
another:
1. Turn both radios “off”.
2. Connect the optional CT-135 Clone Cable between the DATA jacks of the two radios.
3. Turn the radio on while pressing and holding the key which is located to the left of the
[
POWER
]
switch to enter the “Special Function” mode. Do this for both radios (the
order of switch-on does not matter).
4. On the “Destination” radio, rotate the left side
[
DIAL
]
knob to select function menu
item “1 CLONE RX”, then press the left side
[
DIAL
]
knob twice.
5. On the “Source” radio, rotate the left side
[
DIAL
]
knob to select function menu item
2 CLONE TX”, then press the left side
[
DIAL
]
knob. The data from this radio will be
transferred to the other radio.
6. If there is a problem during the cloning process, “ERROR” will be displayed. Check
your cable connections and battery voltage, and try again.
7. If the data transfer is successful, the “Destination” radio displays “RECEIVED....
then turns “off” automatically and turns “on” again.
8. Press the
[
DIAL
]
key of the “Source” radio. The “Source” radio will now automatically
turn “off” and turn back “on” again.
9. Turn both radios “off” and disconnect the Clone Cable.
Can not perform the cloning operation between the FTM-350AR and FTM-350AE.
CLONING
51


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-350 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-350 Series in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info