478471
30
Zoom out
Zoom in
Previous page
1/60
Next page
FTM-350 SERIES OPERATING MANUAL28
NAVI OPERATION
(
REQUIRES OPTIONAL GPS ANTENNA UNIT
)
The FTM-350 Series Transceiver enables navigating to any destination previously entered
into the “Point” memory. Furthermore, you may enable navigating to the location of an-
other APRS station by using the APRS feature. See page 32 in the APRS manual for details.
Before beginning Navigation, the “NAVI” page must be enabled via Set Mode item “C01
DISPLAY SELECT” in the “DISPLAY” group. See page 37.
1
Press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the “NAVI” Page appears.
2
Press the
[
PLIST
]
key to open the “Point” memory list, then rotate the left side
[
DIAL
]
knob to select the desired destination.
3
Press the
[
NAVI
]
key to return to the “NAVI” Page. The destination appears at the
upper right of the display, and the distance between your current position and destina-
tion appears at the lower right of the display. Additionally, your course direction (com-
pass) is shown in the left half of the display.
4
Press the
[
NAVI
]
key to initiate navigation. Drive your vehicle so that the “CAR” icon
turns to a “D” symbol in the Compass display.
5
If desired, while navigating, the current position and date may be stored into the “Point”
memory by pressing the
[
POINT
]
key. Four groups of “Point” memories are available
with four channels for each group.
When your vehicle nears the destination, emits the alarm beep and the “GOAL!” notation
appears in the Compass display.
To return to the “Radio” page, press the
[
FWD
]
or
[
BCK
]
key repeatedly, until the “Radio”
Page appears.
You may customize the NAVI operation via the “NAVI” group of the Set Mode (see page
43).
3
4
2
1
5
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-350 Series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-350 Series in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info