674719
24
Zoom out
Zoom in
Previous page
1/35
Next page
24 FTM-3207DR/DE Advance Manual
VOL
DIAL
SQL
TXPO DW MW
SETUP
REV D/A V/MMHz
VOL
DIAL
SQL
TXPO DW MW
SETUP
REV D/A V/MMHz
Pin 1: PTT/CLONE
Pin 1: PTT/CLONEPin 3: GND
RJ12/6
6 Position 6 Contact
Modular Plug
RJ12/6
6 Position 6 Contact
Modular Plug
Pin 3: GND
Setup (Menu) Mode
The FTM-3207DR/DE Setup (Menu) mode, already described in parts of many previous
chapters, is easy to activate and setup. The Menus may be used to configure many
of transceiver parameters, some of which have not been detailed previously. Use the
following procedure to activate the Setup (Menu) mode:
1. Press and hold the
[
MHz
(
SETUP
)]
key for
one second to enter the Setup menu.
2. Rotate the DIAL knob to select the Menu
Item to be adjusted.
3. Press the
[
MHz
(
SETUP
)]
key momentarily
to enable adjustment of the selected Menu
item, and then rotate the DIAL knob to per-
form the actual adjustment.
4. After completing the selection and adjust-
ment, press and hold the
[
MHz
(
SETUP
)]
key
for one second to exit the Setup menu and
resume normal operation.
VOL
DIAL
SQL
TXPO DW MW
SETUP
REV D/A V/MMHz
Menu Item Function Available Values Default
1: APO
Enables/Disables the Automatic Power
Off feature.
0.5H to 12H (0.5H step)/
OFF
OFF
2: BCLO
Enables/Disables the Busy Channel
Lock-Out feature.
ON/OFF OFF
3: BEP KEY
Enables/Disables the key beeper. KEY+SCAN/KEY/OFF KEY+SCAN
4: BEP EDGE
Enables/Disable the Band-edge beeper
while scanning.
ON/OFF OFF
5: BEP LVL
Sets the beep level High/Low High
6: BEP STBY
Enables/Disable the Standby beep ON/OFF ON
7: BELL
Selects the CTCSS/DCS/EPCS Bell
Ringer repetitions.
1 to 20/CONTINUE/OFF OFF
8: CLK TYPE
Shifting of the CPU clock frequency. A/B A
9: DC VOLT
Indicates the DC Supply Voltage. --- ---
10: DCS CODE
Setting of the DCS code.
104 standard DCS
codes
023
11: DCS INV
Select a combination of DCS inversion
codes in terms of communication direc-
tion.
NORMAL/INVERT/
BOTH
NORMAL
12: DIG AMS
Sets the transmission mode
TXMANUAL/TX FMFIX/
TX DNFIX/AUTO
TXMANUAL
13: DI POPUP
Sets the information pop-up time
2/4/6/8/10/20/30/60/
CONTINUE/OFF
10 SEC
14: DPID LST
DP-ID list (Display/Register/Clear) (Registered DP-ID) ---
15: DT AUTO
Enables/Disables the DTMF Autodialer
feature.
MANUAL/AUTO MANUAL
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-3207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-3207 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FTM-3207

Yaesu FTM-3207 User Manual - English - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info