674719
21
Zoom out
Zoom in
Previous page
1/35
Next page
21
Scanning
FTM-3207DR/DE Advance Manual
Priority Channel Scanning (Dual Watch)
The FTM-3207DR/DE’s scanning features include a two-channel scanning capability which
allows operating on a VFO, Memory channel, or Home channel, while periodically checking
a user-defined Memory Channel for activity. If a station received on the Memory Channel is
strong enough to open the Squelch, the scanner will pause on that station in accordance with
the Scan-Resume mode setting of Menu item “SCAN RSM 37” See page 16.
Here is the procedure for activating Priority Channel Dual Watch operation:
1. Set the transceiver to the Memory Recall mode by pressing the
[
V/M
(
MW
)]
key repeat-
edly, if necessary.
2. Press and hold in the
[
V/M
(
MW
)]
key for one second, then select the memory channel
you wish to be the “Priority” channel.
3. Press the
[
D/A
(
GM
)]
key momentarily. The
“PRI CH?” will appear on the display.
4. Press the
[
D/A
(
GM
)]
key momentarily. The
“P” notation will appear on the “100 MHz”
frequency digit on the display; indicating it is
the Priority channel.
5. Now set the FTM-3207DR/DE for operation
on another memory channel, Home channel,
or on a VFO frequency.
6. Press and hold in the
[
REV
(
DW
)]
key for one second. The display will remain on the
VFO, the selected memory channel, or the Home channel, but every five seconds the
FTM-3207DR/DE will check the Priority Channel for activity.
Note: During Dual Watch operation, the decimal points of the frequency display blink.
7. To cancel Dual Watch operation, press and hold the
[
REV
(
DW
)]
key for one second.
Priority Revert Mode
During Priority channel operation (Dual Watch), a special feature is available which will
allow you to move to the Priority Channel instantly, without waiting for activity to appear
on the Priority Channel.
When this feature is enabled, and priority monitoring is engaged, just press the microphone
PTT switch. Operation will instantly revert to the Priority Channel.
1. Press and hold in the
[
MHz
(
SETUP
)]
key for
one second, then rotate the DIAL knob to
select “DW RVRT 19”.
2.
Press the
[
MHz
(
SETUP
)]
key, and then rotate
the DIAL knob to set this Menu item to “ON”.
3. Press and hold in the
[
MHz
(
SETUP
)]
key for
one second to save the new setting and exit
to normal operation.
To disable Priority Revert operation, select “OFF” in step 2 above.
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-3207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-3207 in the language / languages: English as an attachment in your email.

The manual is 2,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FTM-3207

Yaesu FTM-3207 User Manual - English - 50 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info