674719

Yaesu FTM-3207 Manual

39
Zoom out
Zoom in
Previous page
1/50
Next page
39
Connecting the WIRES-X feature
FTM-3207DR/DE Operating Manual
Press the [D] key
(On activating WIRES-X)
Temporarily displays the operating frequen-
cy (when calling C4FM digital signal, the
callsign of the other station is displayed).
Press the [D] key again to return to the pre-
vious screen.
8.When communication is completed, press and hold the microphone [P3] key to Exit
WIRES-X mode.
Note: About WIRES-X open node stations
A listing of the WIRES-X open node stations, with their location, operation mode, etc.
is posted on the Yaesu WIRES-X website.
https://www.yaesu.com/jp/en/wires-x/index.php
Connect and communicate with WIRES-X in analog mode
In analog mode, specify the connection destination using DTMF signals.
1. In the normal operating screen, press the [D/A(GM)] key to set the analog FM mode,
and then tune to the frequency of the node station.
Note: When DTMF function is set to “AUTO” (DTMF Icon displayed on the LCD),
change to “MANUAL” using the following steps.
Press and hold the [MHz(SETUP)] key
à
Rotate the DIAL knob to select “DT
AUTO 15”
à
Press the [MHz(SETUP)] key
à
Rotate the DIAL knob to select
“MANUAL”
à
Press and hold the [MHz(SETUP)] key
2. While holding down the PTT switch on the microphone, press the [#] key and then
enter the 5 digit ID number of the node or room to be connected, the DTMF code will
be sent to the node station.
3. Keep the transceiver in receive mode for about 10 seconds. Once connection is estab-
lished, you will be able to hear audio.
Note: The connected destination screen will not appear.
4. Face the microphone and speak.
Disconnecting from the node or room
1. While pressing the PTT switch, then enter the “#99999” (DTMF disconnect command)
keys.
Note: In analog mode, the excellent C4FM features such as clear voice, digital informa-
tion etc cannot be used, so we recommend using digital C4FM when communi-
cating with the WIRES-X Internet Linking System
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-3207 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-3207 in the language / languages: English as an attachment in your email.

The manual is 6,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Yaesu FTM-3207

Yaesu FTM-3207 User Manual - English - 35 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info