674764
30
Zoom out
Zoom in
Previous page
1/36
Next page
30
Setup (Menu) Mode
FTM-3100R Operating Manual
Menu Item Function Available Values Default
15: LCD DMMR
Setting of the front panel display illumi-
nation level.
LEVEL 1/2/3/4 LEVEL 4
16: LOCK
Selects the Control Locking Lockout
combination.
KEY+DIAL/PTT/
KEY+PTT/DIAL+PTT/
ALL/KEY/DIAL
KEY+DIAL
17: MIC GAIN
Adjust the microphone gain level. LEVEL 1 to 9 LEVEL 5
18: MEM NAME
Programming an Alpha/Numeric label for
a Memory Channel.
--- ---
19: MW MODE
Selects the method of selecting of chan-
nels for Memory Storage.
NEXT CH/LOWER CH NEXT CH
20: OPEN MSG
Selects the Opening Message that ap-
pears when the radio is powered ON.
OFF/DC/MESSAGE MESSAGE
21: PAG CD-R
Setting the Receiver Pager Code for
the Enhanced CTCSS Paging & Code
Squelch function.
--- 05 47
22: PAG CD-T
Setting the Transmitting Pager Code for
the Enhanced CTCSS Paging & Code
Squelch function.
--- 05 47
23: PRG P1
Programming the function assigned to
Microphone
[
P1
]
key.
SQL OFF
HOME
WX CH
CD SRCH
SCAN
T CALL
TX POWER
Setup Menu Item #1 to
44
SQL OFF
24: PRG P2
Programming the function assigned to
Microphone
[
P2
]
key.
HOME
25: PRG P3
Programming the function assigned to
Microphone
[
P3
]
key.
CD SRCH
26: PRG P4
Programming the function assigned to
Microphone
[
P4
]
key.
ø
27: RF SQL
Adjusts the RF Squelch threshold level. OFF/S1 to S8 OFF
28: RPT ARS
Activates/Deactivates the Automatic Re-
peater Shift feature.
ON/OFF ON
29: RPT FREQ
Sets the magnitude of the Repeater Shift. 0.00 - 150.00 (MHz) 0.60 MHz
30: RPT SFT
Sets the Repeater Shift direction. -RPT/+RPT/SIMPLEX SIMPLEX
31: SCAN RSM
Selects the Scan Resume mode.
BUSY
/
HOLD
/2-10 (SEC) 5.0 SEC
32: SCAN SKP
Selects the Memory Scan mode. OFF/SKIP/SELECT OFF
33: SQL EXP
Sets the squelch type separately for
transmission and reception.
ON/OFF OFF
34: SQL TYPE
Selects the Tone Encoder and/or Decod-
er mode.
TONE/TSQL/DCS/
RV TONE/PAGER/OFF
OFF
35: STEP
Sets the frequency synthesizer steps.
AUTO/5/6.25/10/12.5/15
/20/25/50/100 (kHz)
AUTO
36: TEMP
Indicates the current temperature inside
the transceiver.
--- ---
37: TONE FRQ
Setting of the CTCSS Tone Frequency. 67.0 to 254.1 (Hz) 100.0 HZ
38: TOT
Sets the Time-Out Timer. 0.5 to 10.0 (MIN)/OFF 3.0 MIN
39: TS MUTE
Enables/Disables the receiver audio out-
put while the Tone Search or DCS Search
Scanner is activated.
ON/OFF ON
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-3100R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-3100R in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info