674764
23
Zoom out
Zoom in
Previous page
1/36
Next page
23
Memory Operation
FTM-3100R Operating Manual
Memory Recall
Once the desired frequencies are stored into memory channels, switch from the “VFO”
mode to the “Memory Recall” mode, to operate on the just-stored memory channels.
1. Press the
[
V/M
(
MW
)]
key, repeatedly if nec-
essary, until the “ ” icon and a memory
channel number appear on the display; this
indicates that the “Memory Recall” mode is
now engaged.
2. When more than one memory has been
stored, use the DIAL knob to select any of
the programmed memories for operation.
VOL
DIAL
DW MW
SETUP
REV V/MMHz
SQL
TXPO
Note: Alternatively, the microphone
[
UP
]
or
[
DWN
]
button may be used to step or scan
through the available memories. When using the microphone buttons, press the
button momentarily to move one step up or down; press and hold the
[
UP
]
or
[
DWN
]
button for one second to begin memory scanning.
Memory Recall from the Microphone Keypad
While operating in the Memory Recall mode, the keypad of the MH-48A6JA Microphone
may be used for direct recall of memory channels.
To do this, enter the desired Channel Number on the keypad and then press the
[
#
]
key.
For example:
To recall Memory Channel “5”, press
[
5
]
à
[
#
]
To recall Memory Channel “123”, press
[
1
]
à
[
2
]
à
[
3
]
à
[
#
]
You may also recall Programmable Memory Scan (PMS) channels (“L0/U0” through “L9/
U9”) by entering the channel numbers listed in the below table:
L1 201 L3 205 L5 209 L7 213 L9 217
U1 202 U3 206 U5 210 U7 214 U9 218
L2 203 L4 207 L6 211 L8 215 L0 219
U2 204 U4 208 U6 212 U8 216 U0 220
Moving Memory Data to the VFO
Data stored on memory channels can easily be moved to the VFO.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
Memory Only Mode
Once memory channel programming has been completed, you may place the radio in a
“Memory Only” mode, whereby VFO operation is impossible.
Note: For details, refer to the Advanced Manual (download from the Yaesu website).
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-3100R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-3100R in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info