45733
92
Zoom out
Zoom in
Previous page
1/108
Next page
90 FTM-10R OPERATING MANUAL
REPEATER SETTING
Enables/Disables the Automatic Repeater Shift function.
Sets the Repeater Shift Direction.
Sets the magnitude of the repeater Shift.
CTCSS/DCS/DTMF SETTING
Programming of the DTMF Autodialer.
Enables/Disables the Enhanced CTCSS Paging & Code Squelch func-
tion and setting the Receiving/Transmitting Pager Code for the Enhanced
CTCSS Paging & Code Squelch function.
Selects the number of CTCSS/DCS/EPCS Bell ringer repetitions.
Setting of the DCS code.
Enables/Disables split CTCSS/DCS coding.
Setting of the CTCSS Tone Frequency.
Selects the Tone Encoder and/or Decoder mode.
SCAN SETTING
Activates the Club Channel Monitor.
Selects the Scan range.
Select the Scan type.
Selects the Scan Resume mode.
Select the scan start direction which initiates the scanner using the scan
command by pressing the
key.
Enables/Disables the Weather Alert Scan feature.
MESSAGE SETTING
Programming a Member List for the Message feature.
Sets your Personal ID for the Message feature.
Programming a Message for the Message feature.
POWER SAVE SETTING
Enable/Disable the battery saver of the optional BH-1 Bluetooth Headset.
Setting of the TOT time.
Selects the transmit power output level.
MIC/SPEAKER/AUDIO SETTING
Enables/Disables the Bluetooth function.
Adjust the microphone gain level.
Select the Speaker to be used.
Select the audio output.
Sets the volume level of the intercom mode.
Enables/Disables VOX operation.
Sets the VOX sensitivity.
DISPLAY SETTING
Activates/Disables the Internal Clock/Stop Watch Timer.
Indicates the DC Supply Voltage.
Setting of the display’s illumination level.
SET MODE ITEM
24 RPT ARS
25 RPT MODE
26 RPT SFT
SET MODE ITEM
13 DTMF
21 PAGER
35 SQL BELL
36 SQL DCS
37 SQL EXP
39 SQL TSQF
40 SQL TYPE
SET MODE ITEM
10 CLUB PRI
30 SCN CVRG
31 SCN DRCT
32 SCN MODE
33 SCN STRT
49 WX ALERT
SET MODE ITEM
16 ID LIST
17 ID REG
18 MESSAGE
SET MODE ITEM
7 BLU SAVE
43 TOT
44 TX POWER
SET MODE ITEM
8 BLU VOX
19 MIC GAIN
34 SPEAKER
42 STEREO
45 VOL.ITCOM
46 VOX MIC
47 VOX SENS
SET MODE ITEM
9 CLOCK
11 DC VOLT
12 DIMMER
AVAILABLE VALUES
(
DEFAULT
)
ON/OFF
RPTR OFF/RPTR --/RPTR +
ÚÚ
ÚÚ
Ú
0.00 ~ 99.95 MHz
ÚÚ
ÚÚ
Ú
AVAILABLE VALUES
(
DEFAULT
)
---
OFF/ON
OFF/1T/3T/5T/8T/CONT
104 Standard DCS Code
(
023
)
OFF/ON
50 standard CTCSS tones
(
100 Hz
)
OFF/TONE ENC/TONE SQL/REV
TONE/DCS
AVAILABLE VALUES
(
DEFAULT
)
OFF/AUTO/HOLD
IN BAND/HAM BAND
NORMAL/RETURN
BUSY/HOLD/TIME 3S/TIME 5S/
TIME 10S
UP START/DN.START
OFF/ON
AVAILABLE VALUES
(
DEFAULT
)
---
---
---
AVAILABLE VALUES
(
DEFAULT
)
OFF/ON
1MIN ~ 30MIN or OFF
LOW/MID/HIGH
AVAILABLE VALUES
(
DEFAULT
)
OFF/PTT/VOX HIGH/VOX LOW
MIN/LOW/NORMAL/HIGH/MAX
REAR/F+R/FRONT/OFF
STEREO/MONO
IVOL HI/IVOL LOW
VOX OFF/R-HAND/F-HAND/
FRONT
MIN/1/2/3/4/5/6/7/8/MAX
AVAILABLE VALUES
(
DEFAULT
)
OFF/ON
---
DIMMER 1 ~ DIMMER 5
MENU
(
“SET
)
MODE
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info