45733
68
Zoom out
Zoom in
Previous page
1/108
Next page
66 FTM-10R OPERATING MANUAL
The FTM-10R includes an Enhanced CTCSS tone encoder/decoder and a dedicated micro-
processor providing paging and selective calling features. This allows you to place a call to
a specific station (Paging), and to receive calls of your choice directed only to you (Code
Squelch).
The paging and code squelch systems use two pairs of (alternately switched) CTCSS tones,
which are stored in the pager memories. Basically, your receiver remains silent until it
receives the CTCSS tone pair that matches those stored in the Receiving Pager Memory.
The squelch then opens so the caller is heard, and the paging ringer immediately sounds, if
activated. When you close the PTT key to transmit, the CTCSS tone pair that is stored in
the Transmitting Pager Memory will be transmitted automatically.
On the paged radio, the squelch will close automatically after the incoming page ends.
STORING THE CTCSS TONE PAIRS FOR EPCS OPERATION
1. Press and hold the
[
VOL/SEL
]
key for one second to activate the Menu mode.
2. Rotate the DIAL knob to select Menu Item “F21 PAGER”.
3. Press the key to enable selection of this Menu Item.
4. Press and hold the key for one second to display the
current Receiving CTCSS Tone Pair.
5. Rotate the DIAL knob to set the CTCSS Tone number that
corresponds to the first tone of the Receiving CTCSS Tone
Pair.
6. Press the key, then rotate the DIAL knob to set the
CTCSS Tone number that corresponds to the second tone
of the Receiving CTCSS Tone Pair.
7. Repeat step 6 for setting the Transmitting CTCSS Tone Pair.
8. If you make a mistake, press the key to move the cur-
sor back one space, then re-select the correct number.
9. When you have made your selection of both Receiving and
Transmitting CTCSS tone pairs, press the
[
VOL/SEL
]
key
to save the new setting and exit to normal operation.
NOTE: The FTM-10R does not recognize the order of the 1st tone and the 2nd tone. In
other words, for example, the FTM-10R considers both CTCSS pairs “10, 35
and “35, 10” to be identical.
EPCS
(
E
NHANCED PAGING & CODE SQUELCH
)
OPERATION
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FTM-10R at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FTM-10R in the language / languages: English as an attachment in your email.

The manual is 4,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info