674768
159
Zoom out
Zoom in
Previous page
1/173
Next page
159
Functions to Use as Necessary
Functions to Use as Necessary
Using the Transceiver for Packet Communication
You can perform packet communication with your transceiver by connecting a TNC
(Terminal Node Controller) using an optional Microphone Adapter (CT-44).
TNC
SP
GND
GND
2 kΩ
10 F
ȣ
MIC
MIC
EAR
PTT
TNC
SP
GND
GND
2 kΩ
10 F
ȣ
MIC
MIC
EAR
PTT
After connecting the TNC to the transceiver, set the output signal level to the TNC by
adjusting the sound volume level of your transceiver.
Also, adjust the signal level input to your transceiver using the output level adjustment
volume on the TNC (Input level cannot be adjusted on your transceiver).
Caution
When sending a vast volume of data, the transmission takes a longer time and the transceiver may be
overheated. If the transmission is continued for a long time, the overheat prevention circuit will operate
and the transmission power decreases. If the transmission is continued further, the transmission will be
automatically stopped to prevent the transceiver from overheating and consequently malfunctioning. If
the overheat prevention circuit has operated and then the transceiver returns to the receive mode, turn
the transceiver off, or leave it in the receive mode until the temperature falls.
Tips
Set the receive battery Save Function to OFF during packet communication by selecting [CONFIG]
[17 SAVE RX] in the Set mode.
Reception can be interfered with by noise generated from your PC.
If the transceiver enters an abnormal receive state, disconnect the transceiver from the PC, and
reconnect it to the PC using a photo coupler device or noise filter.
For details on how to connect TNC to the PC, refer to the TNC instruction manual.
159


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info