674768
143
Zoom out
Zoom in
Previous page
1/173
Next page
143
Customize Menu Settings for Individual Use (Set Mode)
Set Mode: SCAN Menu Operations
Selecting a Receive Operation When Scanning Stops
Touch [4 SCAN RESUME] to set the receive operation for when scanning stops.
For details, see “Setting the Receive Operation When Scanning Stops” on page 74.
Setting the Scanning Range
You can set the frequency range for scanning in VFO mode and Memory mode.
1 Touch [5 SCAN WIDTH].
2 Rotate the DIAL to select [VFO], then press the key.
3 Rotate the DIAL to select the desired setting referring to the table below.
ALL
Scans all bands from the current frequency within the 1.8 MHz to 999
MHz range.
BAND Starting with the current frequency, scans within the current band.
4 Press the key.
5 Rotate the DIAL to select [MEMORY], then press the key.
6 Rotate the DIAL to select the desired setting referring to the table below.
ALL CH
Scans all memory channels (1 to 900) starting with the currently specified
memory channel. When “Selected memory channel” is selected, all
specified memory channels are scanned (
see page 76).
BAND
Scans only the memory channels to which the frequencies are registered,
within the same frequency band
*1
as the currently specified memory
channel.
When the memory channels are registered as the specified memory
channels, scans only the specified memory channels to which the
frequencies are registered, within the same frequency band.
*1
*1: For the relationship between frequency bands and receive frequencies, see the table at the
bottom of page 36.
143


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info