674768
130
Zoom out
Zoom in
Previous page
1/173
Next page
130
Customize Menu Settings for Individual Use (Set Mode)
Set Mode: DISPLAY Menu Operations
Adjusting the LCD Backlight and Key Button Light Brightness Level
Adjust the brightness level of the LCD backlight and key button* light.
1 Rotate the DIAL, then touch [7 LCD DIMMER]
2 Rotate the DIAL to select the desired brightness level.
Select from LEVEL 1 to LEVEL 6.
Remark The default setting: LEVEL 6
*“Key button” refers to the keys / switches such as
and located below the LCD panel.
Changing the Opening Message Displayed Immediately after Power-
on
You can select the message under the “YAESU” logo displayed when turning on the
transceiver.
1 Rotate the DIAL, then touch [8 OPENING MESSAGE].
2 Rotate the DIAL to select the desired message referring to the following table.
OFF Displays the receive frequency instead of the opening message
immediately after turning on the power.
DC Displays the power-supply voltage and time when turning on the
power.
MESSAGE Displays a message comprising up to 16 characters when turning
on the power. Press the
key to switch the screen to the
message registration screen. See “Entering Letters” on page 19
to input the message you want to display.
CALLSIGN Displays your call sign when turning on the power.
Displaying the Battery Voltage
Display the battery voltage. When the optional external power supply adapter with
a cigarette plug (SDD-13) is connected, the power supply voltage of this adapter is
displayed.
1 Rotate the DIAL, then touch [9 SENSOR INFO].
The battery voltage is shown on the LCD.
Tips
The indication differs depending on the type of the power supply used.
Battery pack: “Lit”
Battery case: “Dry”
External power supply adapter: “Ext”
During mono band receive, the voltage can be displayed on the LCD constantly (
see page 34).
130


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info