674768
92
Zoom out
Zoom in
Previous page
1/173
Next page
92
Using the GPS Function
GPS Screen Information and Operation
Tips
The GPS data units for position, speed and altitude may be changed by pressing and holding the
key for over one second to enter Set mode, then select [APRS][22 GPS UNIT].
When the GPS function is used, the accurate time and date are obtained from GPS and shown on
the LCD in 24-hour format. This time data is displayed on the GPS and APRS screens.
The geodetic system datum (WGS-84 / Tokyo) of the built-in GPS unit may be changed by selecting
[APRS][19 GPS DATUM] in Set mode. However, since APRS uses the geodetic system of
WGS-84, it is recommended not to change it.
The time zone may be set at 30-minute increments by pressing and holding the
key for over
1 second to enter Set mode, then selecting [APRS][28 TIME ZONE] (the default setting: UTC
0:00).
When the GPS function is active, the power consumption increases by about 30 mA. As a result,
the battery life is reduced by about 20% compared to when the GPS function is deactivated.
The position information obtained from an external GPS device may be used by pressing and
holding the
key for over one second to enter Set mode, then selecting [APRS][17 COM
PORT SETTING] and then setting [INPUT] to [GPS]. In this case, the data from the internal GPS
will be ignored.
When using an external GPS device, move it away from the transceiver to reduce interference.
92


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info