674768
76
Zoom out
Zoom in
Previous page
1/173
Next page
76
Scanning Function
Memory Channel Scanning
The memory channel frequencies may be scanned in the order of the memory channel
numbers.
1 Press the key to enter Memory mode.
2 Rotate the DIAL to select the memory channel to begin memory scanning from.
3 Touch [F MW].
The function menu appears on the LCD.
4 Touch [SCAN].
Scanning (SCAN) begins and progresses toward higher memory channel numbers.
When a signal is received, the decimal point blinks.
Tips Rotate the DIAL clockwise to start scanning toward higher
frequencies.
Rotate the DIAL counterclockwise to start scanning toward
lower frequencies.
When a signal is received during scanning, scanning stops
for 5 seconds to monitor the signal on the frequency of the
signal.
When scanning stops, the decimal point blinks and the LCD
remains illuminated.
After receiving the signal for 5 seconds, scanning resumes.
Press
to cancel scanning.
Tips
When a memory channel is recalled, the regular memory channels (memory channel numbers 1-900)
are scanned.
When a memory bank is recalled, only the memory channels in the memory bank are scanned.
To set the transceiver operation when scanning stops, see “Setting the Receive Operation When
Scanning Stops” on page 74.
Press and hold the
key for over one second to enter Set mode, then configure the following
operating preference settings.
[CONFIG] [3 BEEP] [SELECT]: Sets whether or not the beep sound is emitted when scanning
stops.
[CONFIG] [3 BEEP] [EDGE]: Sets whether or not the beep sound is emitted when the
frequency band edge or memory channel 01 is reached during scanning.
[SCAN][2 SCAN LAMP]: Sets whether or not the LCD is illuminated when scanning stops.
[SCAN][5 SCAN WIDTH]: Sets the range of frequencies or channels to be scanned.
When a signal is received,
the decimal point blinks.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info