674768
72
Zoom out
Zoom in
Previous page
1/173
Next page
72
Scanning Function
VFO Scan
Tips When a signal is received during scanning, the
decimal point blinks.
Rotate the DIAL clockwise to start scanning toward
higher frequencies.
Rotate the DIAL counterclockwise to start scanning
toward lower frequencies.
When a signal is received during scanning, a beep
sound is emitted. Then, scanning stops for 5 seconds
to monitor the frequency. When scanning stops, the
decimal point blinks and the LCD remains illuminated.
After receiving the signal for 5 seconds, scanning
resumes.
To select the range for scanning, enter Set mode
by pressing and holding the
key for over one
second, then select [SCAN] followed by [5 SCAN
WIDTH].
during scanning,
the decimal point blinks.
Canceling Scanning
To exit scanning, touch [STOP] or press .
Tips
To set the transceiver action when scanning stops, see “Setting the Receive Operation When
Scanning Stops” on page 74.
Press and hold the
key for over one second to enter Set mode, then configure the following
operating preferences settings.
[CONFIG] [3 BEEP] [SELECT]: Sets whether or not the beep sound is emitted when scanning
stops.
[CONFIG] [3 BEEP] [EDGE]: Sets whether or not the beep sound is emitted when the frequency
band edge or memory channel 01 is reached during scanning.
[SCAN][2 SCAN LAMP] Sets whether or not the LCD is illuminated when scanning stops.
Skipping Frequencies You Do Not Want to Scan (Skip Search Memory)
During VFO scan, scanning may stop at a frequency that you do not want to receive.
The unwanted frequency can be skipped by registering it to the “skip search memory
channels” in advance. Up to 99 frequencies can be saved onto the skip search memory
channels (memory channels 901 to 999).
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info