674768
67
Zoom out
Zoom in
Previous page
1/173
Next page
67
Using the Memory
Convenient Preset Receiver Memory Channels
Recalling Preset Receiver Memory Channel to Listen to the
International VHF (Marine) Radio
The frequencies (57 channels) used for the international VHF marine radio are registered
in the dedicated preset receiver memory channels.
1 Press the key to set the A-band as the operating band.
2 Touch [F MW].
3 Touch [P.RCVR].
Preset Receiver mode is activated.
4 Press the key to select [INTVHF].
5 Rotate the DIAL to select the desired channel.
Remarks For the available international VHF channels, see the following table.
To stop reception of the international VHF radio, touch [F MW] followed by [P.RCVR]].
In the event of extreme weather disturbances, such as storms and hurricanes, the NOAA (National Oceanic
and Atmospheric Administration) sends a weather alert accompanied by a 1050 Hz tone and subsequent
weather report on one of the NOAA weather channels. You may enable the Weather Alert tone via Set Mode
option [SIGNALING] → [14 WX ALERT], if desired (See page 124).
Tips
The preset receiver memory channel cannot be rewritten with another frequency or data.
To scan the preset receiver memory channels toward higher channel numbers, touch [F MW]
followed by [SCAN]. To scan the preset receiver memory channels toward lower channel numbers,
rotate the DIAL counterclockwise until it clicks once during scanning. When a signal is received
during scanning, the scanning stops to receive the frequency for 5 seconds.
To set the transceiver operation when scanning stops, see “Setting the Receiver Operation“Setting
the Receive Operation When Scanning Stops” on page 74.
To register the International VHF Marine channels into a memory bank, follow the procedure in
“Registering Preset Receiver Memory Channels into Memory Banks” on page 66.
Frequencies of International VHF Marine radio frequencies
registered in the preset receiver memory channels
Memory channel No. Frequency (MHz) Memory channel No. Frequency (MHz)
1 156.050 160.650* 60 156.025 160.625*
2 156.100 160.700* 61 156.075 160.675*
3 156.150 160.750* 62 156.125 160.725*
4 156.200 160.800* 63 156.175 160.775*
5 156.250 160.850* 64 156.225 160.825*
6 156.300 65 156.275 160.875*
7 156.350 160.950* 66 156.325 160.925*
8 156.400 67 156.375
9 156.450 68 156.425
10 156.500 69 156.475
11 156.550 70 156.525
12 156.600 71 156.575
67


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info