674768
52
Zoom out
Zoom in
Previous page
1/173
Next page
52
Repeater Operation
Repeater Operation
Repeater Operation
Communicating Via the Repeater
The transceiver includes an ARS (Automatic Repeater
Shift) function which enables repeater operation
automatically when setting the receiver to the
repeater frequency.
1 Set the receiver frequency to the repeater
frequency.
” or “ ” appears on the left side of the frequency
whereas “TN” and the tone frequency appear on the
right side of the frequency.
2 Begin transmitting by pressing and holding . The
transmitter will automatically be set to the programmed
offset frequency and CTCSS tone.
Tips
Touching [F MW] followed by [REV] enters the “reverse” state where the transmission frequency and
the receive frequency are temporarily reversed. This allows checking to find if direct communication
with the remote station is possible.
In the “reverse” state, “
” blinks on the LCD.
Touching [F MW] followed by [REV] again exits from the “reverse” state.
Press and hold
for over one second to enter Set mode, then configure the following repeater
settings for more convenient use.
[CONFIG][14 RPT ARS]: Deactivates the ARS function.
[CONFIG][15 RPT SHIFT]: Allows setting the repeater shift direction.
[CONFIG][16 RPT SHIFT FREQ]: Allows changing the repeater shift offset
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info