674768
44
Zoom out
Zoom in
Previous page
1/173
Next page
44
Basic Operation
Miscellaneous Settings
8 Rotate the DIAL to select the minute, then press the
key.
Tip If GPS information is received, the time will be set
automatically.
9 To activate the time signal (alarm goes off every hour on
the hour), touch [SIGNAL ON].
The checkbox will be checked.
10 Touch [OK].
The transceiver exits from Set mode.
Remark The current time appears on the LCD.
Tips
At normal temperature, the time deviation is ±30 seconds per month. It may vary depending on the
environment conditions, such as the temperature .
The transceiver is equipped with a rechargeable lithium battery dedicated for the clock. Normally,
the transceiver is powered from the battery pack. When the battery pack is detached or runs
out, the lithium battery starts operating automatically. The lithium battery can power the clock for
approximately 2 months.
When you use the transceiver for the first time or without the battery pack for a long period of time,
the accuracy of the clock may be poor. In such case, reattach the battery pack and adjust the time.
The calendar can display dates from January 1, 2000 A.D. up to December 31, 2099 A.D.
Press and hold
for over one second to enter Set mode, then select [APRS][21 GPS TIME
SET] followed by [AUTO] to display accurate time automatically.
Using the timer function enables the transceiver to automatically turn off at a specified time (
see
page 149). In addition, you can set the transceiver to turn on at a specified time (
see page 149).
Muting Audio
If the A-band and B-band are heard simultaneously during dual receive, and it is difficult
to hear the voices, the audio of the non-operating band may be muted.
1 Press and hold the key for over one second.
The transceiver enters Set mode.
2 Touch [TX/RX].
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info