674768
26
Zoom out
Zoom in
Previous page
1/173
Next page
26
Preparation
Preparing the Battery Pack/External Power Supply
Connecting an External Power Supply for Use in Vehicle
(USA/EXP version only)
The optional external power supply adapter
with a cigarette lighter plug (SDD-13) allows
the transceiver to be used in a vehicle.
1 Turn off the transceiver.
2 Insert the plug of the external power
supply adapter with a cigarette lighter plug
(SDD-13) in the EXT DC IN jack of the
transceiver.
3 Insert the cigarette lighter plug of the
external power supply adapter in the
cigarette lighter socket of the vehicle.
Cautions
y The SDD-13 is compatible with a 12 V DC cigarette lighter socket. Do not connect the SDD-13 to a
24 V DC cigarette lighter socket.
y Use the transceiver at the minimum required transmit power level to prevent overheating.
y Do not continue transmitting for a prolonged period of time. The transceiver may overheat, resulting
in malfunction or burns.
y To operate the transceiver for 7 hours or longer, it is recommended that the battery pack be replaced
with the optional battery case (FBA-39).
y Recharging the fully-charged battery pack repeatedly can shorten its service life. Be extremely careful
not to continually recharge the battery when operating the transceiver using an external power supply.
y While charging the battery pack, protect the transceiver from water.
y Charge the battery pack in a place where the ambient temperature is +5 °C to +35 °C (+41 °F to +95
°F).
y If the terminal or electrode of the battery pack is dirty, the transceiver can malfunction due to poor
contact, resulting in overheating or rupture. If the terminal or electrode gets dirty, clean it using a dry
cloth or cotton swab.
Tips
The SBR-14LI battery pack can be charged in approximately 9.0 hours using the external power
supply (approximately 5 hours to charge the optional battery pack FNB-101LI). If the transceiver is
turned on while the battery pack is charging, the charging time will increase slightly.
Charging stops automatically when the battery pack has been fully charged.
The external power supply can be used with the battery case installed.
If the transceiver is connected to the external power supply with the transceiver turned off,
“CONNECTED TO EXTERNAL POWER” appears on the LCD for about 20 seconds later “BATTERY
NOT INSTALLED” appears.
To cigarette lighter
socket of vehicle
EXT DC IN jack
External power
supply adapter with
a cigarette lighter plug
SDD-13optional
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info