674768

Yaesu FT2DR Manual

25
Zoom out
Zoom in
Previous page
1/173
Next page
25
Preparation
Preparing the Battery Pack/External Power Supply
Remark Approximate hours are estimated assuming that the transceiver is operated under the
following conditions. The operation time that this transceiver can be actually used varies
depending on use conditions, ambient temperature, etc.
• When the GPS function is deactivated.
• LAMP MODE SAVE ON (always LAMP OFF)
• When the transceiver is repeatedly operated by high-power transmission for 6 seconds
and reception for 6 seconds, and standby for 48 seconds with an amateur ham radio
band selected.
How to Use the Battery Case (FBA-39)
The optional battery case (FBA-39) allows 3 AA Alkaline batteries to be used to power
the FT2DR/DE transceiver.
Tip
When the battery case (FBA-39) is used, the power output level may be selected from:
Low Power (L1): 0.1 W
Low Power (L2): Approximately 0.8 W
Note that Low Power (L3) and High Power are not available.
1 Open the cover.
Lift up the lower right corner of the cover as indicated by the
hand pointer in the illustration.
2 Place the alkaline batteries in the battery case.
Caution Use 3 alkaline batteries. Pay attention to polarities (+ and −)
of the alkaline batteries.
3 Close the cover.
Push the four corners of the cover firmly to close it tightly.
Tip
When the battery charge is low, lights on the LCD. When the
batteries are almost exhausted,
blinks on the LCD.
Cautions
y Lithium/Manganese batteries cannot be used with the FBA-39 battery
case. Rechargeable AA batteries cannot be used, either.
y Do not mix new and old batteries. The service life of new batteries may
decrease.
y If you do not use the transceiver for a long period, remove the batteries
from the battery case.
y If the terminal or electrode of the battery case is dirty, the transceiver can
malfunction due to poor contact, resulting in overheating or explosion.
If the terminal or electrode gets dirty, clean it using a dry cloth or cotton
swab.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info