674768
22
Zoom out
Zoom in
Previous page
1/173
Next page
22
Preparation
Preparing the Battery Pack/External Power Supply
Installing/Removing the Battery Pack
Installing the Battery Pack
1 Insert the bottom tabs of the battery pack in the slots
on the back side lower part of the transceiver.
2 Push the battery in until the battery latches click
securely.
Caution
Charge the battery pack before using the transceiver for the first
time after purchase, or when it has not been used for a long
period time.
Caution
Risk of explosion if battery is replaced by an incorrect typ.
Dispose of used batteries according to the instructions.
Removing the Battery Pack
1 While pressing down the latches, remove the battery
pack.
Press the latches down in the direction of the arrows
as shown in the illustration.
Caution
When releasing the battery latches, be careful not to hurt your
fingers and nails.
Charging the Battery Pack
Cautions
y The battery pack is rechargeable about 300 times. However, improper use such as overcharge or
over-discharge can shorten its service life.
y The battery pack is a consumable item. Recharging the battery pack repeatedly will gradually reduce
the charge capacity and duration of its use.
y If the transceiver is not used for a long period of time with the battery pack installed, deterioration of
the battery pack can accelerate.
y If the transceiver is unused for a long period of time, be sure to store it with the battery pack removed.
When the transceiver and battery are stored for an extended period, install the battery pack biannually
and recharge the battery pack about 50% to prevent it from over-discharging.
y Storing the battery pack in a high-temperature environment can accelerate deterioration. Store the
battery pack in a place where the ambient temperature is −20 °C to +50 °C (−4 °F to +122 °F).
y Be careful not to drop or strongly impact the battery pack. It can break.
Battery latches
Press down on the latches
in the direction of the arrow.
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info