674768
18
Zoom out
Zoom in
Previous page
1/173
Next page
18
Before Using the Transceiver
Names and Functions of Controls
y BACKTRACK Screen
Pressing the
key displays the BACKTRACK screen.
The compass setting is displayed to the upper left of the
compass icon. “H-UP” indicates the vehicle direction
of travel is shown at the top of the compass. “N-UP” is
shown when the compass is set to always indicate North
at the top. To change the compass setting, enter Set
mode, then select [DISPLAY][2 HEADING UP].
Upon retrieval of the registered position information, the
distance from the current position is displayed the upper
right of the compass icon.
Touching [YR] displays the position of the received
station on the compass icon (only when the received
signal carries the position information).
Touching [MY] displays your station’s heading direction
on the compass icon.
Touching [MEM] switches to the registration mode to
record.
Touching [] displays the position information registered
with the “” tag. Touching “” while flashing, stores the
position information displayed on the compass icon in the
memory with a “” tag.
Touching [L1] displays the position information registered
with the “L1” tag. Touching [L1] while flashing, the
position information displayed on the compass icon is
stored in the memory with an “L1” tag.
Touching [L2] displays the position information registered
with the “L2” tag. When touching [L2] while flashing,
stores the position information displayed on the compass
icon in the stored in the memory with an “L2” tag.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info