674768
15
Zoom out
Zoom in
Previous page
1/173
Next page
15
Before Using the Transceiver
Names and Functions of Controls
󰚜
DATA terminal*
To use the clone function, connect to another
FT2DR/DE with an optional clone cable (CT-
168).
When updating the firmware, connect to your
PC using a USB cable.
* For instruction to update the firmware, access
our website.
Connect the optional camera-equipped
microphone (MH-85A11U) to this terminal.
Connect an external GPS to this terminal.
󰚧
MIC/SP jack*
Connect a speaker microphone or earpiece
microphone to this jack.
The waterproof protection cannot be attained
when an external microphone is connected.
Do not connect any microphone which is
not specified by Yaesu. A failure can result.
󰚨
EXT DC IN jack*
When charging the battery pack, connect the
battery charger (PA-48 or SAD-14B) to this jack.
In the USA/EXP market, connect an external
power supply adapter with a cigarette lighter
plug (SDD-13) or an external power cable (E-
DC-6) to this jack.
Do not connect any battery charger which
is not specified by Yaesu. A failure can
result.
*: When the included antenna and battery pack are
installed and the MIC/SP jack, EXT DC IN jack, DATA
terminal, and micro SD slot are securely covered with
rubber caps, the FT2DR/DE meets the waterproofing
performance conforming to IPX5 (See page 13).
Touch Screen Display
This is the A-band display area.
This is the B-band display area.
Displays touch keys.
Displays mode.
In VFO mode, “VFO” is displayed.
In Memory mode, “MR” and the channel
number are displayed.
Display Bar indicates the volume level.
Displays the transmit output icon, the S
meter and the PO meter levels.
S meter: Displays the received signal
strength in 9 steps.
PO meter: Displays the transmit power level
in 4 steps.
H I: High power (5W)
L 3: LOW 3 power (2.5W)
L 2: LOW 2 power (1W)
L 1: LOW 1 power (0.1W*
1
)
Displays the time.
Displays the frequency shift direction during
repeater operation (
see page 52).
-: Minus shift
+: Plus shift
@: Split operation
lights when the mute function is active
( see page 44).
Displays the frequency.
Displays icon types.
: Lights when Auto Power Off is active
( see page 145).
: Lights when DTMF function is
enabled ( see page 103).
: Lights when GPS is acquired ( see
page 86).
: Lights when GPS Log Function is
enabled ( see page 89).
: Lights when a microSD memory card
is inserted ( see page 29).
The battery condition is displayed in 8
steps.
: Full battery power
: Battery is depleted. Charge battery.
: (When blinking) Charge battery
immediately.
*
1
: European version (VHF: 0.05W)
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Yaesu FT2DR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Yaesu FT2DR in the language / languages: English as an attachment in your email.

The manual is 40,87 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info